On Tuesday 21 June 2011 12:52 PM, Amit Mahajan wrote:
> On Tue, 2011-06-21 at 12:14 +0530, Avik Sil wrote:
>> On Tuesday 21 June 2011 12:06 PM, Amit Mahajan wrote:
>>> Hi,
>>>
>>> I have booted panda board using 11.05 natty release of ubuntu. It worked
>>> great.
>>>
>>> Now, I am trying to compile the kernel myself. I am using the sources
>>> from tarball provided on 11.05 release page as well as from linaro git
>>> 2.6.38 tree.
>>>
>>>
>>> I have extracted the .config from running ubuntu(of 11.05 LEB) and using
>>> it to compile my own kernels. Then I am just replacing the uImage on
>>> sdcard(generated using 11.05 LEB) by my compiled kernel.
>>>
>>> Boot process goes fine till the init process but then it fails to bring
>>> on the graphics and goes to console mode.
>>>
>>> Any help on this?
>>
>> You may want to install modules on the SD card too:
>>
>> make ARCH=arm CROSS_COMPILE=arm-linux-gnueabi-
>> INSTALL_MOD_PATH=/media/rootfs modules_install
> 
> I am getting these errors while building the modules. I have linaro
> gcc-4.5.1. Is it related to older gcc?
> 
> 
>   AS      arch/arm/boot/compressed/lib1funcs.o
>   LD      arch/arm/boot/compressed/vmlinux
>   OBJCOPY arch/arm/boot/zImage
>   Kernel: arch/arm/boot/zImage is ready
> ERROR: "__aeabi_uldivmod" [sound/soc/codecs/snd-soc-wm8974.ko]
> undefined!
> ERROR: "__aeabi_uldivmod" [sound/soc/codecs/snd-soc-wm8940.ko]
> undefined!
> ERROR: "__aeabi_uldivmod" [sound/soc/codecs/snd-soc-wm8510.ko]
> undefined!
> WARNING: modpost: Found 2 section mismatch(es).
> To see full details build your kernel with:
> 'make CONFIG_DEBUG_SECTION_MISMATCH=y'
> make[1]: *** [__modpost] Error 1
> make: *** [modules] Error 2
> 
> 

I don't know the fix, but to work around it, either disable or make it
built-in in Device Drivers -> Sound card support -> Advanced Linux Sound
Architecture -> ALSA for SoC audio support -> Build all ASoC CODEC drivers

Regards,
Avik


_______________________________________________
linaro-dev mailing list
linaro-dev@lists.linaro.org
http://lists.linaro.org/mailman/listinfo/linaro-dev

Reply via email to