Be sure to use the hwpack_linaro-lt-panda-x11 variant. Without it I've had issues with x.
Regards Tom On Aug 16, 2011, at 10:14 AM, Dave Martin <dave.mar...@linaro.org> wrote: > On Tue, Aug 16, 2011 at 09:41:29AM -0500, Zach Pfeffer wrote: >> I've used the following commands to create an Ubuntu build if it helps: >> >> wget >> http://snapshots.linaro.org/11.05-daily/linaro-ubuntu-desktop/20110728/1/images/tar/linaro-n-ubuntu-desktop-tar-20110728-1.tar.gz >> >> wget >> http://snapshots.linaro.org/11.05-daily/linaro-hwpacks/lt-panda/20110728/0/images/hwpack/hwpack_linaro-lt-panda_20110728-0_armel_supported.tar.gz >> >> bzr branch lp:linaro-image-tools >> >> ./linaro-image-tools/linaro-media-create --mmc /dev/sdc --dev panda >> --hwpack hwpack_linaro-lt-panda_20110728-0_armel_supported.tar.gz >> --binary linaro-n-ubuntu-desktop-tar-20110728-1.tar.gz > > Have you booted the resulting image? > > I did the same thing -- here is a tiny excerpt from the bootlog from these > images, > (on panda rev A1): > > http://pastebin.ubuntu.com/667287/ > > About 700K of log later I got a prompt, but X didn't seem to come up. > Are there any limitations on monitors, or should the board auto-detect > an appropriate display mode etc.? > > Cheers > ---Dave > >> >> -Zach >> >> >> On 16 August 2011 09:20, Frederik Lotter <frederik.lot...@arm.com> wrote: >>> Hi Christian, >>> >>> I am using 32-bit Ubuntu 11.04. Just here in my office everyone is running >>> into the same issue. We are all Ubuntu users (11.04) and both 32-bit and >>> 64-bit machines. >>> >>> Let me know if anything else is needed. >>> >>> Fred >>> >>> -----Original Message----- >>> From: Christian Robottom Reis [mailto:k...@linaro.org] >>> Sent: 16 August 2011 14:36 >>> To: Frederik Lotter >>> Cc: Linaro Development >>> Subject: [frederik.lot...@arm.com: [UBUNTU] linaro-media-create failing] >>> >>>> We have several people here in the support office trying to build an >>>> sdcard using the latest hwpack and root filesystem files as found >>>> here: >>>> >>>> http://releases.linaro.org/platform/linaro-n/ubuntu/leb-panda/latest/ >>>> >>>> We are running into a segfualt in /usr/bin/dpkg during what seems to >>>> be the hwpack installation. >>> >>> Hi Frederik, >>> >>> Please use the linaro-dev mailing list (copied here) for future >>> issue reports. I looked at the log and it's indeed odd that this is >>> happening. Can you reproduce the problem on any of your hosts, and if >>> so, what OS version is installed on them? >>> -- >>> Christian Robottom Reis, Engineering VP >>> Brazil (GMT-3) | [+55] 16 9112 6430 | [+1] 612 216 4935 >>> Linaro.org: Open Source Software for ARM SoCs >>> >>> -- IMPORTANT NOTICE: The contents of this email and any attachments are >>> confidential and may also be privileged. If you are not the intended >>> recipient, please notify the sender immediately and do not disclose the >>> contents to any other person, use it for any purpose, or store or copy the >>> information in any medium. Thank you. >>> >>> >>> _______________________________________________ >>> linaro-dev mailing list >>> linaro-dev@lists.linaro.org >>> http://lists.linaro.org/mailman/listinfo/linaro-dev >>> >> >> _______________________________________________ >> linaro-dev mailing list >> linaro-dev@lists.linaro.org >> http://lists.linaro.org/mailman/listinfo/linaro-dev > > _______________________________________________ > linaro-dev mailing list > linaro-dev@lists.linaro.org > http://lists.linaro.org/mailman/listinfo/linaro-dev _______________________________________________ linaro-dev mailing list linaro-dev@lists.linaro.org http://lists.linaro.org/mailman/listinfo/linaro-dev
