update: I tested another board, and the eth0 showed up, but not the wlan0, which I need. right now, I installed the vivid version(the latest debian) I did "modprobe -r ath6kl_sdio" then "modprobe ath6kl_sdio" but nothing changed.
How can I solve the problem? On Thu, Feb 22, 2018 at 11:11 AM, ahmad <ahmad.raz...@gmail.com> wrote: > I installed linaro ubuntu from https://releases.linaro.org/ub > untu/boards/snapdragon/latest/ on my board, Inforce6410PLUS by the > following commands.I did not install anything else on the board: > > sudo fastboot flash boot > boot-qcom-apq8064-ifc6410-qcom-snapdragon-20151026-139.img > sudo fastboot flash cache firmware-qcom-snapdragon-20151026-139.img > sudo fastboot flash -S 768M userdata > linaro-vivid-developer-qcom-snapdragon-20151026-139.img > > > the problem is that linux does not show Ethernet or wlan0 as the output of > ifconfig. > I did "modprobe -r ath6kl_sdio" then "modprobe ath6kl_sdio" but nothing > changed. > > How can I solve the problem? > _______________________________________________ linaro-dev mailing list linaro-dev@lists.linaro.org https://lists.linaro.org/mailman/listinfo/linaro-dev