hey, On Fri, Feb 23, 2018 at 1:30 AM, ahmad <ahmad.raz...@gmail.com> wrote: > update: > I tested another board, and the eth0 showed up, but not the wlan0, which I > need. right now, I installed the vivid version(the latest debian) > I did "modprobe -r ath6kl_sdio" then "modprobe ath6kl_sdio" but nothing > changed.
a boot log/dmesg would definitely help us.. you are not providing a lot of information.. > > How can I solve the problem? > > > On Thu, Feb 22, 2018 at 11:11 AM, ahmad <ahmad.raz...@gmail.com> wrote: > >> I installed linaro ubuntu from https://releases.linaro.org/ub >> untu/boards/snapdragon/latest/ on my board, Inforce6410PLUS by the Please note that this is a 2.5 year old release. We stopped doing Ubuntu releases in Oct 2015, when we moved to Debian. Newer Debian based releases are available here: http://releases.linaro.org/debian/boards/snapdragon/ However they are still old , and we haven't made releases for quite some time.. However you might be able to get a newer release from Inforce directly. They tend to make their own releases as well (they are very similar to ours, since they are based on what we've done). We are not planning any new release on IFC6410. >> following commands.I did not install anything else on the board: >> >> sudo fastboot flash boot >> boot-qcom-apq8064-ifc6410-qcom-snapdragon-20151026-139.img >> sudo fastboot flash cache firmware-qcom-snapdragon-20151026-139.img >> sudo fastboot flash -S 768M userdata >> linaro-vivid-developer-qcom-snapdragon-20151026-139.img the most obvious issue I can think of, if that you haven't installed the firmware. As explained in the release notes, the file you are flashing in the 'cache' partition does not include the firmware, it's empty by default, because we (Linaro) do not have redistributions rights for them. The release notes explain how to get the firmware from Inforce and install them. Without the firmware, Ethernet would work (it does not need firmware), but WLAN won't. That looks like it could be your issue. >> >> >> the problem is that linux does not show Ethernet or wlan0 as the output of >> ifconfig. >> I did "modprobe -r ath6kl_sdio" then "modprobe ath6kl_sdio" but nothing >> changed. >> >> How can I solve the problem? >> > _______________________________________________ > linaro-dev mailing list > email@example.com > https://lists.linaro.org/mailman/listinfo/linaro-dev _______________________________________________ linaro-dev mailing list firstname.lastname@example.org https://lists.linaro.org/mailman/listinfo/linaro-dev