On Fri, May 18, 2012 at 9:32 AM, Zygmunt Krynicki <[email protected]> wrote: > W dniu 18.05.2012 09:29, Dave Pigott pisze: > >> On 18 May 2012, at 01:20, Michael Hudson-Doyle wrote: >> >>> Hi, >>> >>> After the last few days of poking at things, I think it's time to >>> finally move fully away from conmux to a connection_command / >>> hard_reset_command based approach. >>> >>> I think the actual config file mangling can be done with a short shell >>> script. Although lava-core will fix this properly, I can spend a quick >>> 10 minutes hacking up lava console and lava powerstab commands to get >>> around the loss of easy conmux-console based command lines. >> >> >> I agrees, however the one thing I will miss is being able to go into >> conmux and do "~$hardreset" to reboot a board. What would be nice is if we >> built a small tool set that allowed us to get the boards serial port and PDU >> details by name, connect to the board and reboot the board. > > > Let's make sure we can call: $ lava-dev device reset beagle01
Also, in the light of "flashing to sd mux" (which needs board powered off) commands for "poweroff" and "poweron" would be awesome I guess :). -- Alexander Sack Technical Director, Linaro Platform Teams http://www.linaro.org | Open source software for ARM SoCs http://twitter.com/#!/linaroorg - http://www.linaro.org/linaro-blog _______________________________________________ linaro-validation mailing list [email protected] http://lists.linaro.org/mailman/listinfo/linaro-validation
