On Fri, May 18, 2012 at 4:50 AM, Dave Pigott <[email protected]> wrote:
> On 18 May 2012, at 10:47, Alexander Sack wrote: > > > On Fri, May 18, 2012 at 9:32 AM, Zygmunt Krynicki > > <[email protected]> wrote: > >> W dniu 18.05.2012 09:29, Dave Pigott pisze: > >> > >>> On 18 May 2012, at 01:20, Michael Hudson-Doyle wrote: > >>> > >>>> Hi, > >>>> > >>>> After the last few days of poking at things, I think it's time to > >>>> finally move fully away from conmux to a connection_command / > >>>> hard_reset_command based approach. > >>>> > >>>> I think the actual config file mangling can be done with a short shell > >>>> script. Although lava-core will fix this properly, I can spend a > quick > >>>> 10 minutes hacking up lava console and lava powerstab commands to get > >>>> around the loss of easy conmux-console based command lines. > >>> > >>> > >>> I agrees, however the one thing I will miss is being able to go into > >>> conmux and do "~$hardreset" to reboot a board. What would be nice is > if we > >>> built a small tool set that allowed us to get the boards serial port > and PDU > >>> details by name, connect to the board and reboot the board. > >> > >> > >> Let's make sure we can call: $ lava-dev device reset beagle01 > > > > Also, in the light of "flashing to sd mux" (which needs board powered > > off) commands for "poweroff" and "poweron" would be awesome I guess > > :). > > +1 > > If you haven't already, you should take a look at the existing script that conmux calls to do this. It doesn't currently support off/on, but the PDU does support those - it's just a different function on the menu that it would need to pick. Should be pretty straightforward to add.
_______________________________________________ linaro-validation mailing list [email protected] http://lists.linaro.org/mailman/listinfo/linaro-validation
