Hi, On Mon, Oct 28, 2013 at 7:38 AM, Basil Eljuse <[email protected]> wrote: > > We have got now demonstrated LAVA runs on AEMv8 , Cortex_Base_Model4x4 and > Cortex_Base_Model1x1 following Linaro instructions. > > One of the key usecases we have is for the ability to swap out the kernel or > the firmware binaries from previously released hardware pack, and test the > release candidate binaries using LAVA setup. > > Q:: Can you advice how best to go about within LAVA setup to swap out the > contents of the hardware pack for testing?
If you have a DEB package with your kernel, you can use the command line tool "linaro-hwpack-replace" to replace a package contained in a hardware pack. It is part of "linaro-image-tools": https://launchpad.net/linaro-image-tools > Is there an option where somehow I can specify via test definition, a > location for the binaries which have to be replaced in the hw-pack ‘unpacked > location’? You should be able to call "linaro-hwpack-replace" by adding instructions in the YAML file, as long as it is installed and available in the PATH. Hope it might help. -- Milo Casagrande | Automation Engineer Linaro.org <www.linaro.org> │ Open source software for ARM SoCs _______________________________________________ linaro-validation mailing list [email protected] http://lists.linaro.org/mailman/listinfo/linaro-validation
