Hi Senthil,
I have added hardreset commad in device config to know when to
disconnect the power supply I am disconnecting after seeing the meassge
pdu2.sh notfound and connecting back. I have changed json file as you
mentioned for deploy_image action. Now I am getting error related to
"testrootfs". Please check the log, json and device config.
On Fri, Mar 13, 2015 at 5:34 PM, Senthil Kumaran <senthil.kuma...@linaro.org
> wrote:
> On Friday 13 March 2015 04:28 PM, Narendra Kumar wrote:
>
>> I am trying to submit a job for pandaboard, I am not using
>> PDU so when ever it tries to soft reboot I am removing the power supply
>> and connecting it back, so there is no issues without PDU, but now I am
>> unable to load the image on to board because it is tring for some tftp
>> connection and checking the ethernet connection of board before
>> rebooting of board ethernet connection is working fine but after
>> rebooting ethernet is down and it is unable to load the image to board
>> due to some other reasons. Can any one check the log, device config ,
>> json file for figuringout the issue.
>>
>
> As discussed in IRC, I suggest you to try things and get back.
>
>
> Thank You.
> --
> Senthil Kumaran
> http://www.stylesen.org/
> http://www.sasenthilkumaran.com/
>
--
[image: tree pine]Please consider the environment before printing this
e-mail
Thanks & Regards
Narendra Kumar Chepuri
(+917353049544)
<LAVA_DISPATCHER>2015-03-13 12:59:37 PM INFO: Attempting to connect to device using: telnet localhost 5000
<LAVA_DISPATCHER>2015-03-13 12:59:37 PM DEBUG: expect (10): '[<class 'pexpect.TIMEOUT'>, 'Connection closed by foreign host\\.', 'Connected\\.\r', 'Data Buffering Suspended\\.']'
Trying 127.0.0.1...
Connected to localhost.
Escape character is '^]'.
<LAVA_DISPATCHER>2015-03-13 12:59:47 PM INFO: Matched <class 'pexpect.TIMEOUT'> which means all-good
<LAVA_DISPATCHER>2015-03-13 12:59:48 PM DEBUG: [ACTION-B] Single node test!
<LAVA_DISPATCHER>2015-03-13 12:59:48 PM INFO: [ACTION-B] deploy_linaro_image is started with {u'image': u'file:///images/panda-utopic_developer_20150117-707.img.gz'}
<LAVA_DISPATCHER>2015-03-13 12:59:48 PM INFO: Booting the system master image. Attempt: 1
<LAVA_DISPATCHER>2015-03-13 12:59:48 PM INFO: Perform hard reset on the system
<LAVA_DISPATCHER>2015-03-13 12:59:48 PM DEBUG: Executing on host : '['nice', 'sh', '-c', u'/usr/local/lab-scripts/pdu2.sh pdu01 8']'
sh: 1: /usr/local/lab-scripts/pdu2.sh: not found
<LAVA_DISPATCHER>2015-03-13 12:59:48 PM DEBUG: expect (300): 'Linux version'
U-Boot SPL 2013.01.-rc1 (Jul 10 2013 - 14:48:35)
OMAP4430 ES2.1
Bypassing DPLL failed 4a008180
OMAP SD/MMC: 0
reading u-boot.img
reading u-boot.img
U-Boot 2013.01.-rc1 (Jul 10 2013 - 14:48:35)
CPU : OMAP4430 ES2.1
Board: OMAP4 Panda
I2C: ready
DRAM: 1 GiB
MMC: OMAP SD/MMC: 0
Using default environment
In: serial
Out: serial
Err: serial
Net: No ethernet found.
checking for preEnv.txt
reading preEnv.txt
13 bytes read
Loaded environment from preEnv.txt
Importing preboot environment from mmc ...
Hit any key to stop autoboot: 10 9 8 7 6 5 4 3 2 1 0
mmc0 is current device
reading uEnv.txt
** Unable to read file uEnv.txt **
reading boot.scr
514 bytes read
Loaded script from boot.scr
Running bootscript from mmc0 ...
## Executing script at 82000000
reading uImage
5715496 bytes read
reading uInitrd
2376229 bytes read
reading board.dtb
55267 bytes read
## Booting kernel from Legacy Image at 80200000 ...
Image Name: Linux
Image Type: ARM Linux Kernel Image (uncompressed)
Data Size: 5715432 Bytes = 5.5 MiB
Load Address: 80008000
Entry Point: 80008000
Verifying Checksum ... OK
## Loading init Ramdisk from Legacy Image at 81600000 ...
Image Name: initramfs
Image Type: ARM Linux RAMDisk Image (uncompressed)
Data Size: 2376165 Bytes = 2.3 MiB
Load Address: 00000000
Entry Point: 00000000
Verifying Checksum ... OK
## Flattened Device Tree blob at 815f0000
Booting using the fdt blob at 0x815f0000
Loading Kernel Image ... OK
OK
Using Device Tree in place at 815f0000, end 816007e2
Starting kernel ...
[ 0.000000] Booting Linux on physical CPU 0x0
[ 0.000000] Linux version 3.17.0-1-linaro-o<LAVA_DISPATCHER>2015-03-13 01:01:09 PM DEBUG: expect (150): 'root@master'
map (buildd@lgw01-11) (gcc version 4.8.2 (Ubuntu/Linaro 4.8.2-19ubuntu1) ) #1ubuntu1~ci+140923163221-Ubuntu SMP Tue Sep 23 16:51:21 UTC 201
[ 0.000000] CPU: ARMv7 Processor [411fc092] revision 2 (ARMv7), cr=10c5387d
[ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[ 0.000000] Machine model: TI OMAP4 PandaBoard
[ 0.000000] cma: Reserved 16 MiB at ae800000
[ 0.000000] Memory policy: Data cache writealloc
[ 0.000000] OMAP4430 ES2.1
[ 0.000000] L2C: platform modifies aux control register: 0x0e070000 -> 0x3e470000
[ 0.000000] L2C: DT/platform modifies aux control register: 0x0e070000 -> 0x3e470000
[ 0.000000] L2C-310 erratum 727915 enabled
[ 0.000000] L2C-310 enabling early BRESP for Cortex-A9
[ 0.000000] L2C-310 ID prefetch enabled, offset 1 lines
[ 0.000000] L2C-310 cache controller enabled, 16 ways, 1024 kB
[ 0.000000] L2C-310: CACHE_ID 0x410000c4, AUX_CTRL 0x7e470000
[ 0.000000] PERCPU: Embedded 9 pages/cpu @edf98000 s15104 r8192 d13568 u36864
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 246032
[ 0.000000] Kernel command line: console=tty0 console=ttyO2,115200n8 root=UUID=7949461a-8920-48ec-a788-7713c6dc17da rootwait ro earlyprintk fixrtc nocompcache vram=48M omapfb.vram=0:24M mem=456M@0x80000000 mem=512M@0xA0000000
[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Memory: 942324K/990208K available (8164K kernel code, 652K rwdata, 2540K rodata, 554K init, 8301K bss, 47884K reserved, 269312K highmem)
[ 0.000000] Virtual kernel memory layout:
[ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
[ 0.000000] fixmap : 0xffc00000 - 0xffe00000 (2048 kB)
[ 0.000000] vmalloc : 0xf0000000 - 0xff000000 ( 240 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xef800000 ( 760 MB)
[ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
[ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
[ 0.000000] .text : 0xc0008000 - 0xc0a7c520 (10706 kB)
[ 0.000000] .init : 0xc0a7d000 - 0xc0b07b00 ( 555 kB)
[ 0.000000] .data : 0xc0b08000 - 0xc0bab234 ( 653 kB)
[ 0.000000] .bss : 0xc0bab234 - 0xc13c6848 (8302 kB)
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] NR_IRQS:16 nr_irqs:16 16
[ 0.000000] ti_dt_clocks_register: failed to lookup clock node div_ts_ck
[ 0.000000] ti_dt_clocks_register: failed to lookup clock node bandgap_ts_fclk
[ 0.000000] OMAP clockevent source: timer1 at 32768 Hz
[ 0.000030] sched_clock: 32 bits at 32kHz, resolution 30517ns, wraps every 65536000000000ns
[ 0.000030] OMAP clocksource: 32k_counter at 32768 Hz
[ 0.002105] Console: colour dummy device 80x30
[ 0.004547] console [tty0] enabled
[ 0.004577] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar
[ 0.004608] ... MAX_LOCKDEP_SUBCLASSES: 8
[ 0.004638] ... MAX_LOCK_DEPTH: 48
[ 0.004669] ... MAX_LOCKDEP_KEYS: 8191
[ 0.004669] ... CLASSHASH_SIZE: 4096
[ 0.004699] ... MAX_LOCKDEP_ENTRIES: 32768
[ 0.004730] ... MAX_LOCKDEP_CHAINS: 65536
[ 0.004760] ... CHAINHASH_SIZE: 32768
[ 0.004791] memory used by lock dependency info: 5167 kB
[ 0.004821] per task-struct memory footprint: 1152 bytes
[ 0.004882] Calibrating delay loop... 1594.16 BogoMIPS (lpj=7970816)
[ 0.160308] pid_max: default: 32768 minimum: 301
[ 0.160797] Security Framework initialized
[ 0.160858] AppArmor: AppArmor initialized
[ 0.161010] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.161041] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.164520] CPU: Testing write buffer coherency: ok
[ 0.164703] ftrace: allocating 25911 entries in 76 pages
[ 0.210845] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
[ 0.210998] Setting up static identity map for 0x80768920 - 0x80768990
[ 0.216735] CPU1: Booted secondary processor
[ 0.250274] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
[ 0.250823] Brought up 2 CPUs
[ 0.250885] SMP: Total of 2 processors activated.
[ 0.250915] CPU: All CPU(s) started in SVC mode.
[ 0.253814] devtmpfs: initialized
[ 0.263397] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 1
[ 0.268096] omap_hwmod: l3_main_3 using broken dt data from ocp
[ 0.272033] omap_hwmod: l3_main_2 using broken dt data from ocp
[ 0.436096] xor: measuring software checksum speed
[ 0.530273] arm4regs : 1371.600 MB/sec
[ 0.630279] 8regs : 902.000 MB/sec
[ 0.730285] 32regs : 774.800 MB/sec
[ 0.730285] xor: using function: arm4regs (1371.600 MB/sec)
[ 0.730346] pinctrl core: initialized pinctrl subsystem
[ 0.733367] regulator-dummy: no parameters
[ 0.780670] NET: Registered protocol family 16
[ 0.786254] DMA: preallocated 256 KiB pool for atomic coherent allocations
[ 0.788421] cpuidle: using governor ladder
[ 0.788452] cpuidle: using governor menu
[ 0.803100] OMAP GPIO hardware version 0.1
[ 0.812072] omap-gpmc 50000000.gpmc: GPMC revision 6.0
[ 0.812927] irq: no irq domain found for /ocp/pinmux@4a100040 !
[ 0.813507] irq: no irq domain found for /ocp/pinmux@4a100040 !
[ 0.814056] irq: no irq domain found for /ocp/pinmux@4a100040 !
[ 0.832122] platform 4b501000.aes: Cannot lookup hwmod 'aes'
[ 0.832580] platform 480a5000.des: Cannot lookup hwmod 'des'
[ 0.840148] No ATAGs?
[ 0.840270] hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers.
[ 0.840301] hw-breakpoint: maximum watchpoint size is 4 bytes.
[ 0.842895] OMAP DMA hardware revision 0.0
[ 0.844665] ARM PMU: not yet supported on OMAP4430 due to missing CTI driver
[ 1.070373] raid6: int32x1 108 MB/s
[ 1.240417] raid6: int32x2 148 MB/s
[ 1.410339] raid6: int32x4 182 MB/s
[ 1.580413] raid6: int32x8 191 MB/s
[ 1.580413] raid6: using algorithm int32x8 (191 MB/s)
[ 1.580444] raid6: using intx1 recovery algorithm
[ 1.583404] edma-dma-engine edma-dma-engine.0: Can't allocate PaRAM dummy slot
[ 1.583465] edma-dma-engine: probe of edma-dma-engine.0 failed with error -22
[ 1.616210] omap-dma-engine 4a056000.dma-controller: OMAP DMA engine driver
[ 1.690368] hsusb1_vbus: 3300 mV
[ 1.690887] reg-fixed-voltage wl12xx_vmmc: could not find pctldev for node /ocp/pinmux@4a100040/pinmux_wl12xx_gpio, deferring probe
[ 1.690948] platform wl12xx_vmmc: Driver reg-fixed-voltage requests probe deferral
[ 1.694641] SCSI subsystem initialized
[ 1.695434] usbcore: registered new interface driver usbfs
[ 1.695648] usbcore: registered new interface driver hub
[ 1.695922] usbcore: registered new device driver usb
[ 1.697875] omap_i2c 48070000.i2c: could not find pctldev for node /ocp/pinmux@4a100040/pinmux_i2c1_pins, deferring probe
[ 1.697967] platform 48070000.i2c: Driver omap_i2c requests probe deferral
[ 1.698059] omap_i2c 48072000.i2c: could not find pctldev for node /ocp/pinmux@4a100040/pinmux_i2c2_pins, deferring probe
[ 1.698120] platform 48072000.i2c: Driver omap_i2c requests probe deferral
[ 1.698181] omap_i2c 48060000.i2c: could not find pctldev for node /ocp/pinmux@4a100040/pinmux_i2c3_pins, deferring probe
[ 1.698242] platform 48060000.i2c: Driver omap_i2c requests probe deferral
[ 1.698333] omap_i2c 48350000.i2c: could not find pctldev for node /ocp/pinmux@4a100040/pinmux_i2c4_pins, deferring probe
[ 1.698394] platform 48350000.i2c: Driver omap_i2c requests probe deferral
[ 1.702514] NetLabel: Initializing
[ 1.702545] NetLabel: domain hash size = 128
[ 1.702575] NetLabel: protocols = UNLABELED CIPSOv4
[ 1.702789] NetLabel: unlabeled traffic allowed by default
[ 1.703674] Switched to clocksource 32k_counter
[ 1.807373] AppArmor: AppArmor Filesystem Enabled
[ 1.842041] NET: Registered protocol family 2
[ 1.844207] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
[ 1.844482] TCP bind hash table entries: 8192 (order: 6, 294912 bytes)
[ 1.847045] TCP: Hash tables configured (established 8192 bind 8192)
[ 1.847351] TCP: reno registered
[ 1.847381] UDP hash table entries: 512 (order: 3, 40960 bytes)
[ 1.847747] UDP-Lite hash table entries: 512 (order: 3, 40960 bytes)
[ 1.849273] NET: Registered protocol family 1
[ 1.850463] RPC: Registered named UNIX socket transport module.
[ 1.850494] RPC: Registered udp transport module.
[ 1.850524] RPC: Registered tcp transport module.
[ 1.850524] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 1.854217] Trying to unpack rootfs image as initramfs...
[ 2.010498] Freeing initrd memory: 2316K (c1601000 - c1844000)
[ 2.016754] futex hash table entries: 512 (order: 3, 32768 bytes)
[ 2.017059] audit: initializing netlink subsys (disabled)
[ 2.017333] audit: type=2000 audit(1.990:1): initialized
[ 2.021881] VFS: Disk quotas dquot_6.5.2
[ 2.022033] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 2.024688] NFS: Registering the id_resolver key type
[ 2.025085] Key type id_resolver registered
[ 2.025115] Key type id_legacy registered
[ 2.025299] jffs2: version 2.2. (NAND) (SUMMARY) © 2001-2006 Red Hat, Inc.
[ 2.027130] msgmni has been set to 1351
[ 2.030212] bounce: pool size: 64 pages
[ 2.030334] io scheduler noop registered
[ 2.030395] io scheduler deadline registered
[ 2.030487] io scheduler cfq registered (default)
[ 2.032531] pinctrl-single 4a100040.pinmux: 203 pins at pa fc100040 size 406
[ 2.033020] pinctrl-single 4a31e040.pinmux: 28 pins at pa fc31e040 size 56
[ 2.035919] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 2.040740] omap_uart 4806a000.serial: no wakeirq for uart0
[ 2.041198] 4806a000.serial: ttyO0 at MMIO 0x4806a000 (irq = 104, base_baud = 3000000) is a OMAP UART0
[ 2.043182] 4806c000.serial: ttyO1 at MMIO 0x4806c000 (irq = 105, base_baud = 3000000) is a OMAP UART1
[ 2.044494] 48020000.serial: ttyO2 at MMIO 0x48020000 (irq = 106, base_baud = 3000000) is a OMAP UART2
[ 3.010894] console [ttyO2] enabled
[ 3.016021] 4806e000.serial: ttyO3 at MMIO 0x4806e000 (irq = 102, base_baud = 3000000) is a OMAP UART3
[ 3.048095] brd: module loaded
[ 3.063079] loop: module loaded
[ 3.069305] mtdoops: mtd device (mtddev=name/number) must be supplied
[ 3.083343] usbcore: registered new interface driver asix
[ 3.089233] usbcore: registered new interface driver ax88179_178a
[ 3.095825] usbcore: registered new interface driver cdc_ether
[ 3.102142] usbcore: registered new interface driver smsc95xx
[ 3.108337] usbcore: registered new interface driver net1080
[ 3.114471] usbcore: registered new interface driver cdc_subset
[ 3.120788] usbcore: registered new interface driver zaurus
[ 3.126892] usbcore: registered new interface driver cdc_ncm
[ 3.133911] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 3.140747] ehci-omap: OMAP-EHCI Host Controller driver
[ 3.163726] ehci-omap 4a064c00.ehci: EHCI Host Controller
[ 3.171569] ehci-omap 4a064c00.ehci: new USB bus registered, assigned bus number 1
[ 3.180969] ehci-omap 4a064c00.ehci: irq 109, io mem 0x4a064c00
[ 3.203704] ehci-omap 4a064c00.ehci: USB 2.0 started, EHCI 1.00
[ 3.211364] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 3.218536] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.226135] usb usb1: Product: EHCI Host Controller
[ 3.231231] usb usb1: Manufacturer: Linux 3.17.0-1-linaro-omap ehci_hcd
[ 3.238189] usb usb1: SerialNumber: 4a064c00.ehci
[ 3.246765] hub 1-0:1.0: USB hub found
[ 3.250885] hub 1-0:1.0: 3 ports detected
[ 3.259002] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 3.265594] ohci-omap3: OHCI OMAP3 driver
[ 3.270324] ohci-omap3 4a064800.ohci: OHCI Host Controller
[ 3.276672] ohci-omap3 4a064800.ohci: new USB bus registered, assigned bus number 2
[ 3.285095] ohci-omap3 4a064800.ohci: irq 108, io mem 0x4a064800
[ 3.364776] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[ 3.371917] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.379516] usb usb2: Product: OHCI Host Controller
[ 3.384643] usb usb2: Manufacturer: Linux 3.17.0-1-linaro-omap ohci_hcd
[ 3.391571] usb usb2: SerialNumber: 4a064800.ohci
[ 3.398223] hub 2-0:1.0: USB hub found
[ 3.402252] hub 2-0:1.0: 3 ports detected
[ 3.408294] usbcore: registered new interface driver cdc_wdm
[ 3.414550] usbcore: registered new interface driver usb-storage
[ 3.421051] usbcore: registered new interface driver usbtest
[ 3.428222] mousedev: PS/2 mouse device common for all mice
[ 3.437255] i2c /dev entries driver
[ 3.441009] Driver for 1-wire Dallas network protocol.
[ 3.450073] omap_wdt: OMAP Watchdog Timer Rev 0x00: initial timeout 60 sec
[ 3.458770] device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: dm-de...@redhat.com
[ 3.470031] omap_hsmmc 4809c000.mmc: unable to get vmmc regulator -517
[ 3.477294] platform 4809c000.mmc: Driver omap_hsmmc requests probe deferral
[ 3.485382] omap_hsmmc 480d5000.mmc: unable to get vmmc regulator -517
[ 3.492431] platform 480d5000.mmc: Driver omap_hsmmc requests probe deferral
[ 3.502777] ledtrig-cpu: registered to indicate activity on CPUs
[ 3.509674] usbcore: registered new interface driver usbhid
[ 3.515563] usbhid: USB HID core driver
[ 3.520599] oprofile: no performance counters
[ 3.526580] oprofile: using timer interrupt.
[ 3.531707] TCP: cubic registered
[ 3.535217] Initializing XFRM netlink socket
[ 3.540130] NET: Registered protocol family 10
[ 3.547271] sit: IPv6 over IPv4 tunneling driver
[ 3.554168] NET: Registered protocol family 17
[ 3.558898] NET: Registered protocol family 15
[ 3.563995] Key type dns_resolver registered
[ 3.568786] twl: not initialized
[ 3.572174] twl6030_uv_to_vsel:OUT OF RANGE! non mapped vsel for 1375000 Vs max 1316660
[ 3.580596] twl6030_uv_to_vsel:OUT OF RANGE! non mapped vsel for 1375000 Vs max 1316660
[ 3.589050] twl6030_uv_to_vsel:OUT OF RANGE! non mapped vsel for 1375000 Vs max 1316660
[ 3.589141] usb 1-1: new high-speed USB device number 2 using ehci-omap
[ 3.604461] twl6030_uv_to_vsel:OUT OF RANGE! non mapped vsel for 1375000 Vs max 1316660
[ 3.612976] twl6030_uv_to_vsel:OUT OF RANGE! non mapped vsel for 1375000 Vs max 1316660
[ 3.621398] twl6030_uv_to_vsel:OUT OF RANGE! non mapped vsel for 1375000 Vs max 1316660
[ 3.629821] twl6030_uv_to_vsel:OUT OF RANGE! non mapped vsel for 1410000 Vs max 1316660
[ 3.638244] omap2_set_init_voltage: unable to find boot up OPP for vdd_mpu
[ 3.645477] omap2_set_init_voltage: unable to set vdd_mpu
[ 3.651153] omap2_set_init_voltage: unable to find boot up OPP for vdd_core
[ 3.658447] omap2_set_init_voltage: unable to set vdd_core
[ 3.664245] omap2_set_init_voltage: unable to find boot up OPP for vdd_iva
[ 3.671447] omap2_set_init_voltage: unable to set vdd_iva
[ 3.678100] Power Management for TI OMAP4+ devices.
[ 3.683258] Power Management for TI OMAP4.
[ 3.687591] OMAP4 PM: u-boot >= v2012.07 is required for full PM support
[ 3.694793] ThumbEE CPU extension supported.
[ 3.694793] Registering SWP/SWPB emulation handler
[ 3.709503] Btrfs loaded
[ 3.713073] AppArmor: AppArmor sha1 policy hashing enabled
[ 3.720947] vwl1271: 1800 mV
[ 3.742828] Skipping twl internal clock init and using bootloader value (unknown osc rate)
[ 3.753601] twl 0-0048: PIH (irq 39) nested IRQs
[ 3.758941] usb 1-1: New USB device found, idVendor=0424, idProduct=9514
[ 3.766265] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 3.776000] twl_rtc 48070000.i2c:twl@48:rtc: Enabling TWL-RTC
[ 3.776000] hub 1-1:1.0: USB hub found
[ 3.776428] hub 1-1:1.0: 5 ports detected
[ 3.796661] twl_rtc 48070000.i2c:twl@48:rtc: rtc core: registered 48070000.i2c:twl@48 as rtc0
[ 3.807769] VAUX1_6030: 1000 <--> 3000 mV at 1800 mV
[ 3.815155] VAUX2_6030: 1200 <--> 2800 mV at 1800 mV
[ 3.822296] VAUX3_6030: 1000 <--> 3000 mV at 1200 mV
[ 3.829498] VMMC: 1200 <--> 3000 mV at 3000 mV
[ 3.836059] VPP: 1800 <--> 2500 mV at 1900 mV
[ 3.842529] VUSIM: 1200 <--> 2900 mV at 1800 mV
[ 3.848876] VDAC: 1800 mV
[ 3.852935] VANA: 2100 mV
[ 3.857452] VCXIO: 1800 mV
[ 3.861602] VUSB: 3300 mV
[ 3.866241] V1V8: 1800 mV
[ 3.870727] V2V1: 2100 mV
[ 3.884155] twl6040 0-004b: clk32k is not handled
[ 3.894897] omap_i2c 48070000.i2c: bus 0 rev0.10 at 400 kHz
[ 3.902740] omap_i2c 48072000.i2c: bus 1 rev0.10 at 400 kHz
[ 3.918457] omap_i2c 48060000.i2c: bus 2 rev0.10 at 100 kHz
[ 3.926177] omap_i2c 48350000.i2c: bus 3 rev0.10 at 400 kHz
[ 3.934326] hw-breakpoint: Failed to enable monitor mode on CPU 0.
[ 3.973968] hw-breakpoint: CPU 0 failed to disable vector catch
[ 4.074401] usb 1-1.1: new high-speed USB device number 3 using ehci-omap
[ 4.107330] twl_rtc 48070000.i2c:twl@48:rtc: setting system clock to 2015-03-13 13:01:10 UTC (1426251670)
[ 4.152954] VUSB: disabling
[ 4.156616] VANA: disabling
[ 4.160186] VDAC: disabling
[ 4.169494] Freeing unused kernel memory: 552K (c0a7d000 - c0b07000)
[ 4.176177] mmc0: host does not support reading read-only switch. assuming write-enable.
[ 4.176391] mmc0: new SDHC card at address aaaa
[ 4.179077] mmcblk0: mmc0:aaaa SU04G 3.69 GiB
[ 4.194335] usb 1-1.1: New USB device found, idVendor=0424, idProduct=ec00
[ 4.201751] usb 1-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 4.202209] mmcblk0: p1 p2
[ 4.216278] smsc95xx v1.0.4
Loading, please wait...
[ 4.304443] smsc95xx 1-1.1:1.0 eth0: register 'smsc95xx' at usb-4a064c00.ehci-1.1, smsc95xx USB 2.0 Ethernet, ea:19:f2:b4:42:0c
[ 4.339141] systemd-udevd[876]: starting version 204
Begin: Loading essential drivers ... done.
Begin: Running /scripts/init-premount ... done.
Begin: Mounting root file system ... Begin: Running /scripts/local-top ... done.
Begin: Running /scripts/local-premount ... Scanning for Btrfs filesystems
done.
[ 6.174163] EXT4-fs (mmcblk0p2): INFO: recovery required on readonly filesystem
[ 6.181884] EXT4-fs (mmcblk0p2): write access will be enabled during recovery
[ 10.014984] EXT4-fs (mmcblk0p2): recovery complete
[ 10.030181] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null)
Begin: Running /scripts/local-bottom ... done.
done.
Begin: Running /scripts/init-bottom ... done.
[ 10.594573] random: init urandom read with 112 bits of entropy available
[ 10.830535] init: plymouth-upstart-bridge main process (933) terminated with status 1
[ 10.839050] init: plymouth-upstart-bridge main process ended, respawning
[ 10.909973] init: plymouth-upstart-bridge main process (943) terminated with status 1
[ 10.918457] init: plymouth-upstart-bridge main process ended, respawning
[ 10.975128] init: plymouth-upstart-bridge main process (947) terminated with status 1
[ 10.983825] init: plymouth-upstart-bridge main process ended, respawning
[ 11.048370] init: ureadahead main process (936) terminated with status 5
[ 11.091613] random: nonblocking pool is initialized
[ 11.783355] EXT4-fs (mmcblk0p2): re-mounted. Opts: errors=remount-ro
[ 14.070861] omapdss CORE error: Failed to initialize DSS platform driver
* Stopping Send an event to indicate plymouth is up[74G[ OK ]
* Starting Mount filesystems on boot[74G[ OK ]
* Starting Populate /dev filesystem[74G[ OK ]
* Starting Populate and link to /run filesystem[74G[ OK ]
* Stopping Populate /dev filesystem[74G[ OK ]
* Stopping Populate and link to /run filesystem[74G[ OK ]
* Stopping Track if upstart is running in a container[74G[ OK ]
* Starting Fix-up /sys/kernel/debug filesystem[74G[ OK ]
* Stopping Fix-up /sys/kernel/debug filesystem[74G[ OK ]
* Starting Initialize or finalize resolvconf[74G[ OK ]
* Starting Signal sysvinit that the rootfs is mounted[74G[ OK ]
* Starting LAVA master image network support[74G[ OK ]
* Starting configure network device security[74G[ OK ]
* Starting set console keymap[74G[ OK ]
* Starting Signal sysvinit that virtual filesystems are mounted[74G[ OK ]
* Starting Signal sysvinit that virtual filesystems are mounted[74G[ OK ]
* Stopping set console keymap[74G[ OK ]
* Starting Bridge udev events into upstart[74G[ OK ]
* Starting Signal sysvinit that remote filesystems are mounted[74G[ OK ]
* Starting Clean /tmp directory[74G[ OK ]
* Starting device node and kernel event manager[74G[ OK ]
* Stopping Clean /tmp directory[74G[ OK ]
* Starting load modules from /etc/modules[74G[ OK ]
* Starting cold plug devices[74G[ OK ]
* Starting log initial device creation[74G[ OK ]
* Stopping load modules from /etc/modules[74G[ OK ]
* Starting configure network device security[74G[ OK ]
* Starting configure network device[74G[ OK ]
* Stopping cold plug devices[74G[ OK ]
* Starting load fallback graphics devices[74G[ OK ]
* Stopping log initial device creation[74G[ OK ]
* Starting load fallback graphics devices[74G[[31mfail[39;49m]
* Starting configure network device security[74G[ OK ]
* Starting configure network device[74G[ OK ]
* Starting configure network device security[74G[ OK ]
* Starting set console font[74G[ OK ]
* Stopping set console font[74G[ OK ]
* Starting userspace bootsplash[74G[ OK ]
* Stopping userspace bootsplash[74G[ OK ]
* Starting Send an event to indicate plymouth is up[74G[ OK ]
* Starting configure network device[74G[ OK ]
* Starting Mount network filesystems[74G[ OK ]
* Stopping Send an event to indicate plymouth is up[74G[ OK ]
* Stopping Mount network filesystems[74G[ OK ]
* Starting Bridge socket events into upstart[74G[ OK ]
<LAVA_DISPATCHER>2015-03-13 01:03:39 PM WARNING: Sending newline in case of corruption.
<LAVA_DISPATCHER>2015-03-13 01:03:39 PM DEBUG: send (delay_ms=0):
<LAVA_DISPATCHER>2015-03-13 01:03:39 PM DEBUG: send (delay_ms=0):
<LAVA_DISPATCHER>2015-03-13 01:03:39 PM DEBUG: expect (30): 'root@master'
<LAVA_DISPATCHER>2015-03-13 01:04:09 PM WARNING: Sending newline in case of corruption.
<LAVA_DISPATCHER>2015-03-13 01:04:09 PM DEBUG: send (delay_ms=0):
<LAVA_DISPATCHER>2015-03-13 01:04:09 PM DEBUG: send (delay_ms=0):
<LAVA_DISPATCHER>2015-03-13 01:04:09 PM DEBUG: expect (30): 'root@master'
* Starting Mount network filesystems[74G[ OK ]
* Stopping LAVA master image network support[74G[ OK ]
* Starting Signal sysvinit that local filesystems are mounted[74G[ OK ]
* Starting configure virtual network devices[74G[ OK ]
* Starting Load gator driver module and launch gator daemon[74G[ OK ]
* Starting flush early job output to logs[74G[ OK ]
* Stopping Failsafe Boot Delay[74G[ OK ]
* Stopping Mount filesystems on boot[74G[ OK ]
* Starting System V initialisation compatibility[74G[ OK ]
* Stopping Mount network filesystems[74G[ OK ]
* Stopping flush early job output to logs[74G[ OK ]
* Starting system logging daemon[74G[ OK ]
No sensors found!
Make sure you loaded all the kernel drivers you need.
Try sensors-detect to find out which these are.
No sensors found!
Make sure you loaded all the kernel drivers you need.
Try sensors-detect to find out which these are.
* Starting Bridge file events into upstart[74G[ OK ]
* Setting sensors limits [80G
[74G[ OK ]
* Stopping System V initialisation compatibility[74G[ OK ]
* Starting System V runlevel compatibility[74G[ OK ]
* Starting LAVA master init script[74G[ OK ]
* Starting Restore Sound Card State[74G[ OK ]
* Starting save kernel messages[74G[ OK ]
* Starting regular background program processing daemon[74G[ OK ]
* Stopping Restore Sound Card State[74G[ OK ]
* Loading cpufreq kernel modules... [80G
[74G[ OK ]
* Stopping Restore Sound Card State[74G[ OK ]
* Stopping save kernel messages[74G[ OK ]
* Starting OpenSSH server[74G[ OK ]
* disabled, governor not available... [80G * CPUFreq Utilities: Setting ondemand CPUFreq governor... [80G
[74G[ OK ]
[33m*[39;49m Not running within Xen or no compatible utils
[33m*[39;49m No usable Xen toolstack selected
* Stopping System V runlevel compatibility[74G[ OK ]
auto-serial-console start/running, process 1632
Last login: Fri Mar 13 13:04:21 UTC 2015 on tty1
Welcome to Linaro 14.04 (GNU/Linux 3.17.0-1-linaro-omap armv7l)
* Documentation: https://wiki.linaro.org/
root@master:~# <LAVA_DISPATCHER>2015-03-13 01:04:32 PM DEBUG: send (delay_ms=0): export PS1="root@master [rc=$(echo \$?)]# "
<LAVA_DISPATCHER>2015-03-13 01:04:34 PM DEBUG: send (delay_ms=0):
<LAVA_DISPATCHER>2015-03-13 01:04:34 PM DEBUG: expect (120): 'root@master \[rc=(\d+)\]# '
export PS1="root@master [rc=$(echo \$?)]# "
root@master [rc=0]# <LAVA_DISPATCHER>2015-03-13 01:04:34 PM INFO: Waiting for network to come up
<LAVA_DISPATCHER>2015-03-13 01:04:34 PM DEBUG: expect (1): '['.+', <class 'pexpect.EOF'>, <class 'pexpect.TIMEOUT'>]'
<LAVA_DISPATCHER>2015-03-13 01:04:35 PM DEBUG: send (delay_ms=0): LC_ALL=C ping -W4 -c1 192.168.1.166
<LAVA_DISPATCHER>2015-03-13 01:04:37 PM DEBUG: send (delay_ms=0):
<LAVA_DISPATCHER>2015-03-13 01:04:37 PM DEBUG: expect (60): '['1 received|1 packets received', '0 received|0 packets received', 'Network is unreachable']'
LC_ALL=C ping -W4 -c1 192.168.1.166
PING 192.168.1.166 (192.168.1.166) 56(84) bytes of data.
64 bytes from 192.168.1.166: icmp_seq=1 ttl=64 time=1.71 ms
--- 192.168.1.166 ping statistics ---
1 packets transmitted, 1 received, 0% packet loss, time 0ms
rtt<LAVA_DISPATCHER>2015-03-13 01:04:37 PM DEBUG: expect (29): 'root@master \[rc=(\d+)\]# '
min/avg/max/mdev = 1.710/1.710/1.710/0.000 ms
root@master [rc=0]# <LAVA_DISPATCHER>2015-03-13 01:04:37 PM DEBUG: expect (1): '['.+', <class 'pexpect.EOF'>, <class 'pexpect.TIMEOUT'>]'
<LAVA_DISPATCHER>2015-03-13 01:04:38 PM DEBUG: send (delay_ms=0): ifconfig `ip route get 192.168.1.166 | sed 's/.*via\ //' | cut -d ' ' -f3` | grep 'inet addr' |awk -F: '{split($2,a," "); print "<" a[1] ">"}'
<LAVA_DISPATCHER>2015-03-13 01:04:45 PM DEBUG: send (delay_ms=0):
<LAVA_DISPATCHER>2015-03-13 01:04:45 PM DEBUG: expect (300): '['<(\\d?\\d?\\d?\\.\\d?\\d?\\d?\\.\\d?\\d?\\d?\\.\\d?\\d?\\d?)>', <class 'pexpect.EOF'>, <class 'pexpect.TIMEOUT'>]'
ifconfig `ip route get 192.168.1.166 | sed 's/.*via\ //' | cut -d ' ' -f3` | grep 'inet addr' |awk -F: '{split($2,a," "); print "<" a[1] ">"}'
<192.168.1.229>
root@master [rc<LAVA_DISPATCHER>2015-03-13 01:04:45 PM DEBUG: expect (149): 'root@master \[rc=(\d+)\]# '
=0]# <LAVA_DISPATCHER>2015-03-13 01:04:45 PM DEBUG: Target image IP is 192.168.1.229
<LAVA_DISPATCHER>2015-03-13 01:04:45 PM DEBUG: expect (1): '['.+', <class 'pexpect.EOF'>, <class 'pexpect.TIMEOUT'>]'
<LAVA_DISPATCHER>2015-03-13 01:04:46 PM DEBUG: send (delay_ms=0): echo "device_version=$(lava-master-image-info --master-image-hwpack | sed 's/[^0-9-]//g; s/^-\+//')/$(lava-master-image-info --master-image-rootfs | sed 's/[^0-9-]//g; s/^-\+//')"
<LAVA_DISPATCHER>2015-03-13 01:04:55 PM DEBUG: send (delay_ms=0):
<LAVA_DISPATCHER>2015-03-13 01:04:55 PM DEBUG: expect (5): '['device_version=(\\d+-\\d+/\\d+-\\d+)', <class 'pexpect.EOF'>, <class 'pexpect.TIMEOUT'>]'
echo "device_version=$(lava-master-image-info --master-image-hwpack | sed 's/[^0-9-]//g; s/^-\+//')/$(lava-master-image-info --master-image-rootfs | sed 's/[^0-9-]//g; s/^-\+//')"
device_version=20140923-688/20140922-682
<LAVA_DISPATCHER>2015-03-13 01:04:55 PM DEBUG: expect (2): 'root@master \[rc=(\d+)\]# '
root@master [rc=0]# <LAVA_DISPATCHER>2015-03-13 01:04:55 PM DEBUG: Master image version (hwpack/rootfs) is 20140923-688/20140922-682
<LAVA_DISPATCHER>2015-03-13 01:04:55 PM INFO: System is in master image now
<LAVA_DISPATCHER>2015-03-13 01:04:55 PM DEBUG: About to download file:///images/panda-utopic_developer_20150117-707.img.gz to the host
<LAVA_DISPATCHER>2015-03-13 01:04:55 PM INFO: Downloading image: file:///images/panda-utopic_developer_20150117-707.img.gz
<LAVA_DISPATCHER>2015-03-13 01:05:16 PM INFO: md5sum of downloaded content: ed914a766d46fadd4cd13cdc4b8465bc
<LAVA_DISPATCHER>2015-03-13 01:05:16 PM DEBUG: sha256sum of downloaded content: bf02d5db6a87c4df8323992b40b9a3472fcfd725ee6b2088bdc892301e5d2cbf
<LAVA_DISPATCHER>2015-03-13 01:05:16 PM DEBUG: Executing on host : 'u'sudo mount -o loop,offset=32256 /var/lib/lava/dispatcher/tmp/tmpSIYI3G/panda-utopic_developer_20150117-707.img /tmp/tmpKdJlRE''
<LAVA_DISPATCHER>2015-03-13 01:05:16 PM DEBUG: Executing on host : 'u'sudo mount -o loop,offset=54525952 /var/lib/lava/dispatcher/tmp/tmpSIYI3G/panda-utopic_developer_20150117-707.img /tmp/tmpqj5qmr''
<LAVA_DISPATCHER>2015-03-13 01:05:17 PM DEBUG: Skip customizing temp image /var/lib/lava/dispatcher/tmp/tmpSIYI3G/panda-utopic_developer_20150117-707.img !
<LAVA_DISPATCHER>2015-03-13 01:05:17 PM DEBUG: Customize object is None !
<LAVA_DISPATCHER>2015-03-13 01:05:17 PM DEBUG: Executing on host : ''rm -rf /tmp/tmpqj5qmr''
<LAVA_DISPATCHER>2015-03-13 01:05:17 PM DEBUG: Executing on host : ''rm -rf /tmp/tmpKdJlRE''
<LAVA_DISPATCHER>2015-03-13 01:05:17 PM DEBUG: Executing on host : 'u'sudo mount -o loop,offset=32256 /var/lib/lava/dispatcher/tmp/tmpSIYI3G/panda-utopic_developer_20150117-707.img /tmp/tmpFaIDnP''
<LAVA_DISPATCHER>2015-03-13 01:05:17 PM DEBUG: Executing on host : ''rm -rf /tmp/tmpFaIDnP''
<LAVA_DISPATCHER>2015-03-13 01:05:17 PM DEBUG: Unable to read boot commands dynamically.
<LAVA_DISPATCHER>2015-03-13 01:05:17 PM DEBUG: Executing on host : 'u'sudo mount -o loop,offset=32256 /var/lib/lava/dispatcher/tmp/tmpSIYI3G/panda-utopic_developer_20150117-707.img /tmp/tmpgUHwqw''
<LAVA_DISPATCHER>2015-03-13 01:05:17 PM DEBUG: Executing on host : 'u'nice sudo tar --selinux -C /tmp/tmpgUHwqw -czf /var/lib/lava/dispatcher/tmp/tmpSIYI3G/boot.tgz .''
<LAVA_DISPATCHER>2015-03-13 01:05:17 PM DEBUG: Executing on host : ''rm -rf /tmp/tmpgUHwqw''
<LAVA_DISPATCHER>2015-03-13 01:05:18 PM DEBUG: Executing on host : 'u'sudo mount -o loop,offset=54525952 /var/lib/lava/dispatcher/tmp/tmpSIYI3G/panda-utopic_developer_20150117-707.img /tmp/tmp5CyId1''
<LAVA_DISPATCHER>2015-03-13 01:05:18 PM DEBUG: Executing on host : 'u'nice sudo tar --selinux -C /tmp/tmp5CyId1 -czf /var/lib/lava/dispatcher/tmp/tmpSIYI3G/root.tgz .''
<LAVA_DISPATCHER>2015-03-13 01:06:06 PM DEBUG: Executing on host : ''rm -rf /tmp/tmp5CyId1''
<LAVA_DISPATCHER>2015-03-13 01:06:06 PM DEBUG: Executing on host : 'u'nice tar --selinux -C /tmp/tmpRwjJS8 -xzf /var/lib/lava/dispatcher/tmp/tmpSIYI3G/boot.tgz''
<LAVA_DISPATCHER>2015-03-13 01:06:07 PM DEBUG: send (delay_ms=0):
<LAVA_DISPATCHER>2015-03-13 01:06:07 PM DEBUG: send (delay_ms=0):
<LAVA_DISPATCHER>2015-03-13 01:06:07 PM DEBUG: expect (10): '['root@master \\[rc=(\\d+)\\]# ', <class 'pexpect.TIMEOUT'>]'
root@master [rc=0]# <LAVA_DISPATCHER>2015-03-13 01:06:07 PM INFO: Format testboot and testrootfs partitions
<LAVA_DISPATCHER>2015-03-13 01:06:07 PM DEBUG: expect (1): '['.+', <class 'pexpect.EOF'>, <class 'pexpect.TIMEOUT'>]'
<LAVA_DISPATCHER>2015-03-13 01:06:08 PM DEBUG: send (delay_ms=0): umount /dev/disk/by-label/testrootfs
<LAVA_DISPATCHER>2015-03-13 01:06:10 PM DEBUG: send (delay_ms=0):
<LAVA_DISPATCHER>2015-03-13 01:06:10 PM DEBUG: expect (600): 'root@master \[rc=(\d+)\]# '
umount /dev/disk/by-label/testrootfs
umount: /dev/disk/by-label/testrootfs: not found
root@master [rc=1]# <LAVA_DISPATCHER>2015-03-13 01:06:10 PM DEBUG: expect (1): '['.+', <class 'pexpect.EOF'>, <class 'pexpect.TIMEOUT'>]'
<LAVA_DISPATCHER>2015-03-13 01:06:11 PM DEBUG: send (delay_ms=0): nice mkfs -t ext4 -q /dev/disk/by-label/testrootfs -L testrootfs
<LAVA_DISPATCHER>2015-03-13 01:06:14 PM DEBUG: send (delay_ms=0):
<LAVA_DISPATCHER>2015-03-13 01:06:14 PM DEBUG: expect (900): 'root@master \[rc=(\d+)\]# '
nice mkfs -t ext4 -q /dev/disk/by-label/testrootfs -L testrootfs
Could not stat /dev/disk/by-label/testrootfs --- No such file or directory
The device apparently does not exist; did you specify it correctly?
root@master [rc=1]# <LAVA_DISPATCHER>2015-03-13 01:06:14 PM INFO: General Exception: executing u'nice mkfs -t ext4 -q /dev/disk/by-label/testrootfs -L testrootfs' failed with code 1
<LAVA_DISPATCHER>2015-03-13 01:06:14 PM DEBUG: finally status fail
<LAVA_DISPATCHER>2015-03-13 01:06:14 PM WARNING: [ACTION-E] deploy_linaro_image is finished with error (executing u'nice mkfs -t ext4 -q /dev/disk/by-label/testrootfs -L testrootfs' failed with code 1).
ErrorMessage: executing u'nice mkfs -t ext4 -q /dev/disk/by-label/testrootfs -L testrootfs' failed with code 1
Lava failed at action deploy_linaro_image with error:executing u'nice mkfs -t ext4 -q /dev/disk/by-label/testrootfs -L testrootfs' failed with code 1
Traceback (most recent call last):
File "/usr/lib/python2.7/dist-packages/lava_dispatcher/job.py", line 364, in run
action.run(**params)
File "/usr/lib/python2.7/dist-packages/lava_dispatcher/actions/deploy.py", line 115, in run
rootfstype=rootfstype, bootloadertype=bootloadertype,)
File "/usr/lib/python2.7/dist-packages/lava_dispatcher/client/base.py", line 398, in deploy_linaro
bootloadertype)
File "/usr/lib/python2.7/dist-packages/lava_dispatcher/device/bootloader.py", line 370, in deploy_linaro_prebuilt
bootloadertype)
File "/usr/lib/python2.7/dist-packages/lava_dispatcher/device/master.py", line 167, in deploy_linaro_prebuilt
self._deploy_tarballs(boot_tgz, root_tgz, rootfstype)
File "/usr/lib/python2.7/dist-packages/lava_dispatcher/device/master.py", line 178, in _deploy_tarballs
self._format_testpartition(master, rootfstype)
File "/usr/lib/python2.7/dist-packages/lava_dispatcher/device/master.py", line 269, in _format_testpartition
% (fstype, self.testrootfs_path, self.testrootfs_label), timeout=1800)
File "/usr/lib/python2.7/dist-packages/lava_dispatcher/client/base.py", line 122, in run
"executing %r failed with code %s" % (cmd, rc))
RuntimeError: executing u'nice mkfs -t ext4 -q /dev/disk/by-label/testrootfs -L testrootfs' failed with code 1
<LAVA_DISPATCHER>2015-03-13 01:06:14 PM DEBUG: Executing on host : '['nice', 'sh', '-c', u'/usr/local/lab-scripts/pdu2.sh pdu01 8 0']'
sh: 1: /usr/local/lab-scripts/pdu2.sh: not found
<LAVA_DISPATCHER>2015-03-13 01:06:14 PM DEBUG: Finalizing child process group with PID 17652
<LAVA_DISPATCHER>2015-03-13 01:06:14 PM INFO: Submitting the test result with parameters = {u'token': '<HIDDEN>', u'stream': u'/anonymous/narendra/', u'server': u'http://cnk1@127.0.1.1/RPC2/'}
<LAVA_DISPATCHER>2015-03-13 01:06:14 PM DEBUG: server RPC endpoint URL: http://cnk1@127.0.1.1/RPC2/
<LAVA_DISPATCHER>2015-03-13 01:06:14 PM INFO: Dashboard : http://127.0.1.1/dashboard/permalink/bundle/2bc62b7fea9dede0cfe1ab13e07ec45707edea3d/
panda01.conf
Description: Binary data
test.json
Description: application/json
_______________________________________________ linaro-validation mailing list linaro-validation@lists.linaro.org http://lists.linaro.org/mailman/listinfo/linaro-validation
