Thanks John, that's most useful, I am definitely going to look into the whole embedded platforms in greater detail. Do you know why the projectors will not work on the CE platform? Or have a link to any macromedia \ Microsoft technotes that may be of use?
Many thanks Tim -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of John Mathis Sent: 18 March 2005 19:34 To: Lingo programming discussion list Subject: Re: <lingo-l> Director & lingo & xtras on embedded windows I believe the problem is the limited memory -- I use 512 MB Compact Flash, with 256 Mb ram. No doubt I could improve memory usage, but a daily restart is not a bad alternative. Of course, more memory should also help. I'm using an XPE image that takes around 400Mb, leaving 100MB for my app & swap space...my app is around 10-15 MB (all dcr & cct). I expect I could optimize the XPE image further, but that's what I have now. ----- Original Message ----- From: "Tim Welford" <[EMAIL PROTECTED]> To: "Lingo programming discussion list" <[email protected]> Sent: Friday, March 18, 2005 9:44 AM Subject: RE: <lingo-l> Director & lingo & xtras on embedded windows > Excellent, Thanks a lot John, do you know in what respect you are having > problems with the virtual memory, is this cause you are booting from a > disk and there is no hard drive, or because the XP image you have does > not include the virtual memory options etc or something else. And could > this be alleviated by having just a massive amount of good quality RAM > in? > > Thanks very much > > Tim > > -----Original Message----- > From: [EMAIL PROTECTED] > [mailto:[EMAIL PROTECTED] On Behalf Of John Mathis > Sent: 18 March 2005 13:27 > To: Lingo programming discussion list > Subject: Re: <lingo-l> Director & lingo & xtras on embedded windows > >> Does anybody have any experience with using director (any version) >> projectors on Windows CE or Windows XP Embedded platforms. > > > > I have about 35 units deployed with Windows XP Embedded. I was > surprised at > how well it works. The main problem I'm having is related to virtual > memory. > I addressed this by doing a daily restart. > > Windows CE will not run a projector. > > John Mathis > Inplicity > > > [To remove yourself from this list, or to change to digest mode, go to > http://www.penworks.com/lingo-l.cgi To post messages to the list, email > [email protected] (Problems, email [EMAIL PROTECTED]). > Lingo-L is for learning and helping with programming Lingo. Thanks!] > > > > [To remove yourself from this list, or to change to digest mode, go to > http://www.penworks.com/lingo-l.cgi To post messages to the list, email > [email protected] (Problems, email [EMAIL PROTECTED]). Lingo-L > is for learning and helping with programming Lingo. Thanks!] [To remove yourself from this list, or to change to digest mode, go to http://www.penworks.com/lingo-l.cgi To post messages to the list, email [email protected] (Problems, email [EMAIL PROTECTED]). Lingo-L is for learning and helping with programming Lingo. Thanks!] [To remove yourself from this list, or to change to digest mode, go to http://www.penworks.com/lingo-l.cgi To post messages to the list, email [email protected] (Problems, email [EMAIL PROTECTED]). Lingo-L is for learning and helping with programming Lingo. Thanks!]
