hi guys, I found out what it was: a CD that did run but onyl just about! ther must have been some glitches in the actual burn, or on the CD-R that I used, as when i did another one and tested again, that error was gone as well.
So there another little leson learned -would have never thought that that woudl cause such a pop up?! Yes, Happy new year to EVERYbody out there... On 12/31/05, Valentin Schmidt <[EMAIL PROTECTED]> wrote: > hi nik, > > I havn't heard of this, but like john I usually only use halt instead. > If switching to halt doesn't help in your case, you could put a > lingo.ini next to your projector, with > > on startup > the debugplaybackenabled = 1 > the traceLogFile = "log.txt" > the trace = 1 > end > > and then run and quit the projector and check if there is any helpful > information at the end of log.txt. > > cheers, > valentin > > > nik crosina wrote: > > Hi, > > > > I am having a strange little problem here - never before in about 8, 9 > > years of Director ....: > > > > Whenever I run a simple dir exe from a CD-ROM, even only launch it, > > and then quit it (which just takes it to a timed credit/quit screen > > and then to a frame with a 'quit' script) it comes up with an alert > > sauying 'This application is quitting because too many errors > > occurred' > > > > ... and I am thinking: No, it's not. It's quittingbecasue I clicked > > quit. Becasue the thing is that when I use it, all functions are > > working perfectly, it uses the PDF Xtra as it should, and there is not > > much more in there that could go wrong (or so I am thnk ing > > currently...) > > > > Have you heared or experience dthat before? > > > > Thaks and a happy and enjoyable start to the new year all of you!!!! > > [To remove yourself from this list, or to change to digest mode, go to > http://www.penworks.com/lingo-l.cgi To post messages to the list, email > [email protected] (Problems, email [EMAIL PROTECTED]). Lingo-L is for > learning and helping with programming Lingo. Thanks!] > -- Nik C [To remove yourself from this list, or to change to digest mode, go to http://www.penworks.com/lingo-l.cgi To post messages to the list, email [email protected] (Problems, email [EMAIL PROTECTED]). Lingo-L is for learning and helping with programming Lingo. Thanks!]
