I am useing Director MX (9.0) for Mac and Win. The Mac runs under 10.3 and on Win it is Win98 on VPC 6 to create Projector.
I Test the Projector first on the hardisc running under 10.3 and classic and also Win98 on VPC in this Case I get the 'ShockWave installing' error for Win.
Then I test the Prjector on other extern Systems (Win98, 2000, NT4) from a CD-Rom then I get following error (translate from german): "This Program can not start, because it can not create all nessesary files. Pherhaps ther is less of ram."
Win98 on VPC has 512 MB Ram and the others are like them, so I do not think that the ram should be the problem.
About the admin rights: on the Mac I create and use it as normal user without adminrights - it is OK.
Win98 has not an admin configuration?!?
By Import Files and by creating projector I uncheck all ShockWave settings. I create normal and compressed Projector but do not use ShockWave Compression format or make Shockwave Player.
This tip I get from a friend too but it was not the solution ...
Thanks for your advise - I hope to get a way to check about QuickTime is installed or not.
Ueliisa
On 02.04.2004, at 21:40, Buzz Kettles wrote:
At 8:57 PM +0200 4/2/04, you wrote:Hi Buzz
yes ther are 3 Mac and 3Win32 Xtras (QT6Asset.x32, QTAuth.x32, QTExport.x32) in the Xtras Folder on the CD:
note: you don't need to include QTAuth.x32, QTExport.x32 (or their mac versions) in the projector's Xtras folder - these Xtras can only be used within Director Authoring.
On the Mac there is no Problem.
For Win it is the same "error" with insalled or not installed QuickTime
then it sounds like either a Windows 'permissions' issue or a problem with the projector libs (IML, projector skeleton etc.). Is it a regular projector? (not a Shockwave-projector)
What flavor of Windows are you using?
Do you have admin rights?
& you are using Director 8.5, correct?
-Buzz
[To remove yourself from this list, or to change to digest mode, go to http://www.penworks.com/lingo-l.cgi To post messages to the list, email [EMAIL PROTECTED] (Problems, email [EMAIL PROTECTED]). Lingo-L is for learning and helping with programming Lingo. Thanks!]
Ueliisa
On 02.04.2004, at 20:21, Buzz Kettles wrote:
That function lives in the QT Xtra. Did you include this Xtra within your projector?
-Buzz
At 7:50 PM +0200 4/2/04, you wrote:From: [EMAIL PROTECTED] Subject: quickTimeVersion() Date: 2. April 2004 12:57:43 GMT+02:00 To: [EMAIL PROTECTED]
If i create a Projector with ask the quicktime version with 'quickTimeVersion()' on the start of the movie (with 'enterFrame').
And then I start the projector - the projector want always to install the schockWavePlayer 8.5 ??? or I get the message that it can not found some components.
Without this script ('enterFrame') it works well!
I hope someone knows more about this case.
[To remove yourself from this list, or to change to digest mode, go to http://www.penworks.com/lingo-l.cgi To post messages to the list, email [EMAIL PROTECTED] (Problems, email [EMAIL PROTECTED]). Lingo-L is for learning and helping with programming Lingo. Thanks!]
