>We are working with a 832x624 Director movie, with a 640x480
>Quicktime running on it.
>The Quicktime is 15fps, Sorenson compression, with 22Khz, stereo
>sound. Is this something
>the typical Pentium III 500Mhz system can handle nowadays. The
>presentation is running from
>a ISO PC-only CD.
Depending on the data rate, it should be easy. One thing to change is
the resolution. I'm proud to know you in terms of the fact that
you've chosen a standard Mac resolution, but it's pretty uncommon for
PCs. It should be 800 x 600.
Also, make the CD as a hybrid, with both Mac and PC projectors. It
may not be needed by the client, but you may want to show it off as
something you've developed, and then you would need it to work on
your Macs too. I always try to make my Mac only projects work on PCs,
and PC only ones work on Mac. It's surprising how often that turns
out to be a good thing to have done.
--
[To remove yourself from this list, or to change to digest mode, go to
http://www.penworks.com/LUJ/lingo-l.cgi To post messages to the list,
email [EMAIL PROTECTED] (Problems, email [EMAIL PROTECTED])
Lingo-L is for learning and helping with programming Lingo. Thanks!]
