Hi Guillaume,
So, I've been working with an experienced Linux user to figure out from
your email the suggested steps. Here's what we did:
1. ./configure -- help
2. Looked for anything that said *-xv* OR* -opengl*
3. Didn't find anything specific in --help
4. However, we did try the following:
- ./configure --enable-xv --disable strict
- ./configure --enable-glx --disable strict
Unfortunately, neither of the above variations fixed the video problem,
which remains extremely slow (probably <2 FPS), and the errors remain the
same. Here's the output from linphonec:
ALSA lib conf.c:4687:(snd_config_expand) Unknown parameters 0
ALSA lib control.c:951:(snd_ctl_open_noupdate) Invalid CTL default:0
ALSA lib conf.c:4687:(snd_config_expand) Unknown parameters 1
ALSA lib control.c:951:(snd_ctl_open_noupdate) Invalid CTL default:1
ALSA lib conf.c:4687:(snd_config_expand) Unknown parameters 2
ALSA lib control.c:951:(snd_ctl_open_noupdate) Invalid CTL default:2
ALSA lib pcm_dmix.c:1018:(snd_pcm_dmix_open) unable to open slave
Ready
linphonec> ortp-error-no such method on filter MSGLXVideo, fid=16387 method
index=1
Refreshing
ortp-error-Could not open display (null)
Registration on sip:sip.linphone.org successful.
linphonec> Friend "Granny1" <sip:[email protected]> is Online
^CTerminating...
ortp-error-Cannot unsubscribe to ["BBB1" <sip:[email protected]>]
ortp-error-Cannot unsubscribe to ["debian" <sip:[email protected]:5060>]
Unregistration on sip:sip.linphone.org done.
linphonec> ortp-error-presence_process_io_error not implemented yet
ortp-error-presence_process_io_error not implemented yet
ortp-error-presence_process_io_error not implemented yet
ortp-error-presence_process_io_error not implemented yet
I'm betting that I didn't run ./configure in the way you're suggesting.
Could you please be more specific about your earlier suggestion regarding
running configure with -xv and -opengl?
Thank you very much.
Charles Hamilton
On Tue, Sep 17, 2013 at 9:23 AM, Charles Hamilton <[email protected]>wrote:
> Hello again, Guillaume--
>
> Sorry to ask for a clarification, but I'm still not entirely certain what
> you mean. Is this what you are suggesting:
>
> 1) I should recompile Linphone
> 2) then, instead of *./configure* only, it should be *./configure -xv*OR
> *./configure -ogengl
> *
> 3) then *sudo make && sudo make install*
> 4) then compare each of the builds ( -xv vs. -opengl) to check how video
> performs?
>
> As an FYI, when doing the current build, I was directed by one of your
> colleagues to run *~/linphone/mediastreamer2 $ ./configure
> --disable-strict* when compiling the mediastreamer2 part of the build
> since I was getting errors at that point. I'm assuming that doesn't affect
> your current recommendation, correct?
>
> Thank you again for your speedy response!
>
> Charles Hamilton
>
>
>
> On Tue, Sep 17, 2013 at 9:01 AM, Guillaume Beraudo <
> [email protected]> wrote:
>
>> Hi,
>>
>> You may compile linphone either with:
>> - xv;
>> - opengl.
>>
>> See the ./configure
>>
>> Guillaume
>>
>>
>>
>> On Tue, Sep 17, 2013 at 08:44:04AM -0400, Charles Hamilton wrote:
>> > Hi Guillaume,
>> >
>> > Unfortunately, I'm very new to Linux. Can you be more specific about
>> how I
>> > would do what you suggest?
>> >
>> > Thank you very much for your help.
>> > Charles Hamilton
>> >
>> >
>> > On Tue, Sep 17, 2013 at 8:19 AM, Guillaume Beraudo <
>> > [email protected]> wrote:
>> >
>> > > Hi,
>> > >
>> > > Have you compared builds with opengl and xv?
>> > >
>> > > Guillaume
>> > >
>> > >
>> > > On Mon, Sep 16, 2013 at 02:53:14PM -0400, Charles Hamilton wrote:
>> > > > Hello,
>> > > >
>> > > > I've now successfully compiled Linphone from source for Debian
>> Wheezy and
>> > > > am running it on the Beaglebone Black.
>> > > >
>> > > > Audio seems fine. However, video remains a problem with extremely
>> slow
>> > > > fps/latency. Here's an output from Linphonec:
>> > > >
>> > > > linphonec> ortp-error-no such method on filter MSGLXVideo, fid=16387
>> > > > method index=1
>> > > > Refreshing
>> > > > Registration on sip:sip.linphone.org successful.
>> > > > linphonec> -unknown source-(1) : error 10 : Missing token, at
>> offset -1
>> > > > near [Index: 0 (Start: 0-Stop: 0) ='<missing '@'>', type<24>
>> Line:
>> > > > 1 LinePos:24]
>> > > > : Missing '@'
>> > > > ortp-error-header_contact parser error for [Contact:
>> sip:192.xxx.xxx.xxx]
>> > > > ortp-error-No contact in response.
>> > > > ortp-error-presence op [0x811b8] receive an unexpected answer [200]
>> > > > -unknown source-(1) : error 10 : Missing token, at offset -1
>> > > > near [Index: 0 (Start: 0-Stop: 0) ='<missing '@'>', type<24>
>> Line:
>> > > > 1 LinePos:24]
>> > > > : Missing '@'
>> > > > ortp-error-header_contact parser error for [Contact:
>> sip:192.xxx.xxx.xxx]
>> > > > ortp-error-No contact in response.
>> > > > ortp-error-presence op [0x5d450] receive an unexpected answer [200]
>> > > >
>> > > > Would anyone have any suggestions for troubleshooting this?
>> > > >
>> > > > Thank you very much for any advice.
>> > > > Charles Hamilton
>> > >
>> > > > _______________________________________________
>> > > > Linphone-users mailing list
>> > > > [email protected]
>> > > > https://lists.nongnu.org/mailman/listinfo/linphone-users
>> > >
>> > >
>> > > _______________________________________________
>> > > Linphone-users mailing list
>> > > [email protected]
>> > > https://lists.nongnu.org/mailman/listinfo/linphone-users
>> > >
>>
>> > _______________________________________________
>> > Linphone-users mailing list
>> > [email protected]
>> > https://lists.nongnu.org/mailman/listinfo/linphone-users
>>
>>
>> _______________________________________________
>> Linphone-users mailing list
>> [email protected]
>> https://lists.nongnu.org/mailman/listinfo/linphone-users
>>
>
>
_______________________________________________
Linphone-users mailing list
[email protected]
https://lists.nongnu.org/mailman/listinfo/linphone-users
