Hi Charles, It looks like that your problem is coming for intensive encoding/decoding of the video. May you try to use an other codec than theora?
Cheers, Ghislain On 20 September 2013 16:44, Charles Hamilton <[email protected]> wrote: > Hello again, Ghislain-- > > Sorry for the delay. I've been troubleshooting a registration issue for > several hours since early this morning and wasn't able to actually execute > a connected call with a proper log. Finally fixed that... > > In any case, here's a more complete debug log from a call I just did > between the two beaglebone blacks: > > http://paste.ubuntu.com/6132976/ > > The latency problem is even worse now, and both clients crash after the > call connects. > > I really look forward to your guidance. > > Charles > > > > > > On Fri, Sep 20, 2013 at 7:32 AM, Charles Hamilton > <[email protected]>wrote: > >> HI Ghislain, >> >> The reason I didn't send a full call log was because after i queried you >> about the primary problem -- video latency even with self-view mode -- a >> second problem began occurring: I couldn't make a connection with the two >> Beagleboards after they'd been connecting (albeit poorly). I keep getting >> the error "Incompatible media parameters." So, I didn't have a full call >> log anymore. >> >> I wanted to keep the error reporting confined to one item at a time -- >> the video latency -- in the hope that it would expedite your response. >> >> I'm trying right now to see what I can do to get a connection again. >> >> Thanks for your follow up. >> Charles >> >> >> On Fri, Sep 20, 2013 at 2:32 AM, Ghislain Mary < >> [email protected]> wrote: >> >>> Hi Charles, >>> >>> Thanks for the logs. However they are not complete. To be able to help >>> you we would need the logs covering the full duration of a call. >>> >>> Cheers, >>> Ghislain >>> >>> >>> On 19 September 2013 19:08, Charles Hamilton <[email protected]>wrote: >>> >>>> A follow-up to my prior message. I forgot to give you the debug window >>>> log. Here it is: >>>> >>>> http://paste.ubuntu.com/6129095/ >>>> >>>> Thanks again! >>>> Charles >>>> >>>> >>>> >>>> On Thu, Sep 19, 2013 at 11:10 AM, Charles Hamilton < >>>> [email protected]> wrote: >>>> >>>>> Hi Guillaume, >>>>> >>>>> Thank you for your follow-up. >>>>> >>>>> To clarify, the problem with the Debian wheezy build on my Beaglebone >>>>> Black is the video self-view, which seems to drag with exceptional >>>>> latenc6. >>>>> Here are the various things I've tried to get Linphone working: >>>>> >>>>> *Image size* - I've tried both qcif (176x144) and 320 x 240 to >>>>> minimize resources >>>>> *Codecs/Audio* - speex 16000, speex 8000 >>>>> *Codecs/Video* - I've tried many, if not all, of the codecs. That's >>>>> less of a problem, though, than the fact that self-view video seems to be >>>>> playing back at around 2 fps. Some background on this: >>>>> *Webcams* -- I've tried many different types of webcams, and the >>>>> video latency is the same on this Linphone debian wheezy build. I've >>>>> settled on a model that uses a generic UVC driver set, and it seems to be >>>>> best suited across multiple OSes, builds, and chat pkgs. >>>>> *Other sip/voip/video chat pkgs* -- Ekiga, Gajim, Jitsi all playback >>>>> on video self-view is very smooth without latency >>>>> *Ubuntu on Beaglebone Black* *with pre-compiled Linphone 3.3.2 pkg*-- >>>>> Video playback with self-view is perfectly fine, although the >>>>> connected/call stream is very slow. >>>>> >>>>> I know you and your team are very busy, and try your best to respond >>>>> to queries and bug reports on the lists. >>>>> >>>>> However, if you might steer me in the right direction on getting >>>>> Debian Wheezy working, I'd be very grateful. >>>>> >>>>> Thanks again, Guillaume. >>>>> Charles >>>>> >>>>> >>>>> >>>>> >>>>> >>>>> >>>>> On Thu, Sep 19, 2013 at 3:27 AM, Guillaume Beraudo < >>>>> [email protected]> wrote: >>>>> >>>>>> Hi, >>>>>> >>>>>> You did what I suggested. >>>>>> Could you send a log while in call? >>>>>> >>>>>> What codec are you using? What image size? >>>>>> >>>>>> >>>>>> Guillaume >>>>>> >>>>>> >>>>>> On Wed, Sep 18, 2013 at 03:43:14PM -0400, Charles Hamilton wrote: >>>>>> > Hi Guillaume, >>>>>> > >>>>>> > So, I've been working with an experienced Linux user to figure out >>>>>> from >>>>>> > your email the suggested steps. Here's what we did: >>>>>> > >>>>>> > 1. ./configure -- help >>>>>> > 2. Looked for anything that said *-xv* OR* -opengl* >>>>>> > 3. Didn't find anything specific in --help >>>>>> > 4. However, we did try the following: >>>>>> > - ./configure --enable-xv --disable strict >>>>>> > - ./configure --enable-glx --disable strict >>>>>> > >>>>>> > Unfortunately, neither of the above variations fixed the video >>>>>> problem, >>>>>> > which remains extremely slow (probably <2 FPS), and the errors >>>>>> remain the >>>>>> > same. Here's the output from linphonec: >>>>>> > >>>>>> > ALSA lib conf.c:4687:(snd_config_expand) Unknown parameters 0 >>>>>> > ALSA lib control.c:951:(snd_ctl_open_noupdate) Invalid CTL default:0 >>>>>> > ALSA lib conf.c:4687:(snd_config_expand) Unknown parameters 1 >>>>>> > ALSA lib control.c:951:(snd_ctl_open_noupdate) Invalid CTL default:1 >>>>>> > ALSA lib conf.c:4687:(snd_config_expand) Unknown parameters 2 >>>>>> > ALSA lib control.c:951:(snd_ctl_open_noupdate) Invalid CTL default:2 >>>>>> > ALSA lib pcm_dmix.c:1018:(snd_pcm_dmix_open) unable to open slave >>>>>> > Ready >>>>>> > linphonec> ortp-error-no such method on filter MSGLXVideo, >>>>>> fid=16387 method >>>>>> > index=1 >>>>>> > Refreshing >>>>>> > ortp-error-Could not open display (null) >>>>>> > Registration on sip:sip.linphone.org successful. >>>>>> > linphonec> Friend "Granny1" <sip:[email protected]> is >>>>>> Online >>>>>> > ^CTerminating... >>>>>> > ortp-error-Cannot unsubscribe to ["BBB1" < >>>>>> sip:[email protected]>] >>>>>> > ortp-error-Cannot unsubscribe to ["debian" < >>>>>> sip:[email protected]:5060>] >>>>>> > Unregistration on sip:sip.linphone.org done. >>>>>> > linphonec> ortp-error-presence_process_io_error not implemented yet >>>>>> > ortp-error-presence_process_io_error not implemented yet >>>>>> > ortp-error-presence_process_io_error not implemented yet >>>>>> > ortp-error-presence_process_io_error not implemented yet >>>>>> > >>>>>> > I'm betting that I didn't run ./configure in the way you're >>>>>> suggesting. >>>>>> > >>>>>> > Could you please be more specific about your earlier suggestion >>>>>> regarding >>>>>> > running configure with -xv and -opengl? >>>>>> > >>>>>> > Thank you very much. >>>>>> > Charles Hamilton >>>>>> > >>>>>> > >>>>>> > >>>>>> > On Tue, Sep 17, 2013 at 9:23 AM, Charles Hamilton < >>>>>> [email protected]>wrote: >>>>>> > >>>>>> > > Hello again, Guillaume-- >>>>>> > > >>>>>> > > Sorry to ask for a clarification, but I'm still not entirely >>>>>> certain what >>>>>> > > you mean. Is this what you are suggesting: >>>>>> > > >>>>>> > > 1) I should recompile Linphone >>>>>> > > 2) then, instead of *./configure* only, it should be >>>>>> *./configure -xv*OR >>>>>> > > *./configure -ogengl >>>>>> > > * >>>>>> > > 3) then *sudo make && sudo make install* >>>>>> > > 4) then compare each of the builds ( -xv vs. -opengl) to check >>>>>> how video >>>>>> > > performs? >>>>>> > > >>>>>> > > As an FYI, when doing the current build, I was directed by one of >>>>>> your >>>>>> > > colleagues to run *~/linphone/mediastreamer2 $ ./configure >>>>>> > > --disable-strict* when compiling the mediastreamer2 part of the >>>>>> build >>>>>> > > since I was getting errors at that point. I'm assuming that >>>>>> doesn't affect >>>>>> > > your current recommendation, correct? >>>>>> > > >>>>>> > > Thank you again for your speedy response! >>>>>> > > >>>>>> > > Charles Hamilton >>>>>> > > >>>>>> > > >>>>>> > > >>>>>> > > On Tue, Sep 17, 2013 at 9:01 AM, Guillaume Beraudo < >>>>>> > > [email protected]> wrote: >>>>>> > > >>>>>> > >> Hi, >>>>>> > >> >>>>>> > >> You may compile linphone either with: >>>>>> > >> - xv; >>>>>> > >> - opengl. >>>>>> > >> >>>>>> > >> See the ./configure >>>>>> > >> >>>>>> > >> Guillaume >>>>>> > >> >>>>>> > >> >>>>>> > >> >>>>>> > >> On Tue, Sep 17, 2013 at 08:44:04AM -0400, Charles Hamilton wrote: >>>>>> > >> > Hi Guillaume, >>>>>> > >> > >>>>>> > >> > Unfortunately, I'm very new to Linux. Can you be more specific >>>>>> about >>>>>> > >> how I >>>>>> > >> > would do what you suggest? >>>>>> > >> > >>>>>> > >> > Thank you very much for your help. >>>>>> > >> > Charles Hamilton >>>>>> > >> > >>>>>> > >> > >>>>>> > >> > On Tue, Sep 17, 2013 at 8:19 AM, Guillaume Beraudo < >>>>>> > >> > [email protected]> wrote: >>>>>> > >> > >>>>>> > >> > > Hi, >>>>>> > >> > > >>>>>> > >> > > Have you compared builds with opengl and xv? >>>>>> > >> > > >>>>>> > >> > > Guillaume >>>>>> > >> > > >>>>>> > >> > > >>>>>> > >> > > On Mon, Sep 16, 2013 at 02:53:14PM -0400, Charles Hamilton >>>>>> wrote: >>>>>> > >> > > > Hello, >>>>>> > >> > > > >>>>>> > >> > > > I've now successfully compiled Linphone from source for >>>>>> Debian >>>>>> > >> Wheezy and >>>>>> > >> > > > am running it on the Beaglebone Black. >>>>>> > >> > > > >>>>>> > >> > > > Audio seems fine. However, video remains a problem with >>>>>> extremely >>>>>> > >> slow >>>>>> > >> > > > fps/latency. Here's an output from Linphonec: >>>>>> > >> > > > >>>>>> > >> > > > linphonec> ortp-error-no such method on filter MSGLXVideo, >>>>>> fid=16387 >>>>>> > >> > > > method index=1 >>>>>> > >> > > > Refreshing >>>>>> > >> > > > Registration on sip:sip.linphone.org successful. >>>>>> > >> > > > linphonec> -unknown source-(1) : error 10 : Missing >>>>>> token, at >>>>>> > >> offset -1 >>>>>> > >> > > > near [Index: 0 (Start: 0-Stop: 0) ='<missing '@'>', >>>>>> type<24> >>>>>> > >> Line: >>>>>> > >> > > > 1 LinePos:24] >>>>>> > >> > > > : Missing '@' >>>>>> > >> > > > ortp-error-header_contact parser error for [Contact: >>>>>> > >> sip:192.xxx.xxx.xxx] >>>>>> > >> > > > ortp-error-No contact in response. >>>>>> > >> > > > ortp-error-presence op [0x811b8] receive an unexpected >>>>>> answer [200] >>>>>> > >> > > > -unknown source-(1) : error 10 : Missing token, at offset >>>>>> -1 >>>>>> > >> > > > near [Index: 0 (Start: 0-Stop: 0) ='<missing '@'>', >>>>>> type<24> >>>>>> > >> Line: >>>>>> > >> > > > 1 LinePos:24] >>>>>> > >> > > > : Missing '@' >>>>>> > >> > > > ortp-error-header_contact parser error for [Contact: >>>>>> > >> sip:192.xxx.xxx.xxx] >>>>>> > >> > > > ortp-error-No contact in response. >>>>>> > >> > > > ortp-error-presence op [0x5d450] receive an unexpected >>>>>> answer [200] >>>>>> > >> > > > >>>>>> > >> > > > Would anyone have any suggestions for troubleshooting this? >>>>>> > >> > > > >>>>>> > >> > > > Thank you very much for any advice. >>>>>> > >> > > > Charles Hamilton >>>>>> > >> > > >>>>>> > >> > > > _______________________________________________ >>>>>> > >> > > > Linphone-users mailing list >>>>>> > >> > > > [email protected] >>>>>> > >> > > > https://lists.nongnu.org/mailman/listinfo/linphone-users >>>>>> > >> > > >>>>>> > >> > > >>>>>> > >> > > _______________________________________________ >>>>>> > >> > > Linphone-users mailing list >>>>>> > >> > > [email protected] >>>>>> > >> > > https://lists.nongnu.org/mailman/listinfo/linphone-users >>>>>> > >> > > >>>>>> > >> >>>>>> > >> > _______________________________________________ >>>>>> > >> > Linphone-users mailing list >>>>>> > >> > [email protected] >>>>>> > >> > https://lists.nongnu.org/mailman/listinfo/linphone-users >>>>>> > >> >>>>>> > >> >>>>>> > >> _______________________________________________ >>>>>> > >> Linphone-users mailing list >>>>>> > >> [email protected] >>>>>> > >> https://lists.nongnu.org/mailman/listinfo/linphone-users >>>>>> > >> >>>>>> > > >>>>>> > > >>>>>> >>>>>> > _______________________________________________ >>>>>> > Linphone-users mailing list >>>>>> > [email protected] >>>>>> > https://lists.nongnu.org/mailman/listinfo/linphone-users >>>>>> >>>>>> >>>>>> _______________________________________________ >>>>>> Linphone-users mailing list >>>>>> [email protected] >>>>>> https://lists.nongnu.org/mailman/listinfo/linphone-users >>>>>> >>>>> >>>>> >>>> >>>> _______________________________________________ >>>> Linphone-users mailing list >>>> [email protected] >>>> https://lists.nongnu.org/mailman/listinfo/linphone-users >>>> >>>> >>> >>> _______________________________________________ >>> Linphone-users mailing list >>> [email protected] >>> https://lists.nongnu.org/mailman/listinfo/linphone-users >>> >>> >> > > _______________________________________________ > Linphone-users mailing list > [email protected] > https://lists.nongnu.org/mailman/listinfo/linphone-users > >
_______________________________________________ Linphone-users mailing list [email protected] https://lists.nongnu.org/mailman/listinfo/linphone-users
