Hello Stan, > When I activate the "A" weak signal process, it encounters an error and > wants to shut down. > > The error signature: mod name ntdll.dll, mod ver > 5.1.2600.2180 offset 00001010 > > I can send the detailed error report file, but I will need a direct > e-mail address since NO attachments are allowed on this list.
I am afraid I can not draw any conclusion from a Windows error report file. Actually I have never seen one although (of course) I have seen Windows say it generates such files. It did however not tell me where those files reside and I found it easier to use other debug methods. Maybe you could try some other things first: 1) Start the slave first. It should give the message about waiting for RAW16 input that you reported in the first mail. Then start the master and see what happens. 2) Reverse the computers. Do not worry about soundcards, just enable whatever you have in the machine to become a slave. It will be a good idea to save the settings of the master somewhere (copy par*.* C:\safe_place) so you can copy it back afterwords. I would not be surprised if starting a master will also cause a crash in the computer that does not want to be a slave. 3) Copy all the files in the Linrad directory to a new place in the master. Start the Linrad master. Then start a second issue of Linrad in the master computer. Set it in slave mode first by use of N, R and W (to save). Then give it unused channels (reversed soundcards) with U. Does the slave work when running inside the master computer? 4) Do the same operation on the other computer. Does it work with both master and slave in it but with the network cable disconnected? If it does, what happens in case you put the cable back? In the (likely) event that none of the above tests points to the problem, send the error report file directly to me if it contains readable text. (In case it is just a memory dump I can not get anything out of it) If the problem stays I will send you a copy of linrad.exe that will write a debug file that will show exactly what system call was causing the crasch. 73 Leif ############################################################# This message is sent to you because you are subscribed to the mailing list <linrad@antennspecialisten.se>. To unsubscribe, E-mail to: <[EMAIL PROTECTED]> To switch to the DIGEST mode, E-mail to <[EMAIL PROTECTED]> To switch to the INDEX mode, E-mail to <[EMAIL PROTECTED]> Send administrative queries to <[EMAIL PROTECTED]>