We have SuSe linux running on S/390 in an LPAR and all was well until the hardware team purchased new DASD and de-creed that we need to move from our existing UCBs to new devices.
/proc/dasd/devices currently shows: 10A8(ECKD) at (94:0) is dasda:active at blocksize: 4096, 601020 blocks, 2347 MB 10A9(ECKD) at (94:4) is dasdb:active at blocksize: 4096, 601020 blocks, 2347 MB 10AA(ECKD) at (94:8) is dasdc:active at blocksize: 4096, 601020 blocks, 2347 MB /boot/parmfile shows: dasd=10A8,10A9,10AA root=/dev/dasdb1 noinitrd The UCB addresses 10A8, 10A9 and 10AA need to be replaced with 2B47, 2B48 and 2B49. Is it a simple case of editing the boot/parmfile ? Or is there more ? Many thanks Andrew Davis Important: Internet communications are not necessarily secure and may be intercepted or changed after they are sent. The Abbey National Group does not accept liability for any such changes. If you wish to confirm the origin or content of this communication, please contact the sender using an alternative means of communication. This communication does not create or modify any contract. If you are not the intended recipient of this communication you should destroy it without copying, disclosing or otherwise using its contents. Please notify the sender immediately of the error. The Abbey National Group comprises Abbey National plc and its subsidiary group of companies. Abbey National plc. Registered Office: Abbey National House, 2 Triton Square, Regents Place, London, NW1 3AN. Reg. No. 2294747. Registered in England.
