This is not correct. See my other reply to Andrew's message. Mark Post
-----Original Message----- From: Ramalingam, Vinod Kumar (Cognizant) [mailto:[EMAIL PROTECTED]] Sent: Tuesday, December 11, 2001 8:00 AM To: [EMAIL PROTECTED] Subject: Re: Moving Linux DASD Hi Davis.. For devices other than the root device, You can edit the parmfile and re-run the silo command. You can't do this for root device as the device that you are adding is not bootable. Vinod. > -----Original Message----- > From: Davis, Andrew Phillip (SWD) [SMTP:[EMAIL PROTECTED]] > Sent: Tuesday, December 11, 2001 3:15 PM > To: [EMAIL PROTECTED] > Subject: Moving Linux DASD > > We have SuSe linux running on S/390 in an LPAR and all was well until the > hardware team purchased new DASD and de-creed that we need to move from > our > existing UCBs to new devices. > > /proc/dasd/devices currently shows: > > 10A8(ECKD) at (94:0) is dasda:active at blocksize: 4096, 601020 blocks, > 2347 MB > 10A9(ECKD) at (94:4) is dasdb:active at blocksize: 4096, 601020 blocks, > 2347 MB > 10AA(ECKD) at (94:8) is dasdc:active at blocksize: 4096, 601020 blocks, > 2347 MB > > /boot/parmfile shows: > > dasd=10A8,10A9,10AA root=/dev/dasdb1 noinitrd > > The UCB addresses 10A8, 10A9 and 10AA need to be replaced with 2B47, 2B48 > and 2B49. > > Is it a simple case of editing the boot/parmfile ? Or is there more ? > > Many thanks > > > Andrew Davis > > > > > > Important: > > Internet communications are not necessarily secure and may be intercepted > or changed after they are sent. > The Abbey National Group does not accept liability for any such changes. > If you wish to confirm the origin or content of this communication, please > contact the sender using an alternative means of communication. > > This communication does not create or modify any contract. > > If you are not the intended recipient of this communication you should > destroy it without copying, disclosing or otherwise using its contents. > Please notify the sender immediately of the error. > > The Abbey National Group comprises Abbey National plc and its subsidiary > group of companies. > > Abbey National plc. Registered Office: Abbey National House, 2 Triton > Square, Regents Place, London, NW1 3AN. Reg. No. 2294747. > Registered in England.
