We are attempting to setup guest-lan for our linux box running 2.2.16 kernel. under zvm 4.2
We have applied ptf's : UM30225 / UQ61461 / UM30140 to CP and IP on vm and it "appears" that the VM IP stack is inserting into our guest lan. We can ping the address etc. Linux on the other hand is being stubborn... We have DL'd the latest qdio.o and qeth.o from developerworks. We have also applied all recommended maintenance to the kernel from this site: http://www10.software.ibm.com/developerworks/opensource/linux390/current2_2.shtml When we do insmods for qdio and qeth this is what we get.... linux1:~ # insmod qdio Using /lib/modules/2.2.16/net/qdio.o linux1:~ # linux1:~ # insmod qeth noauto,0x0500,0x0501,0x0502,portname:VLAN1,eth0 Using /lib/modules/2.2.16/net/qeth.o linux1:~ # On the console we see: Jan 17 16:40:32 linux1 kernel: qdio: loading QDIO base support Jan 17 16:40:32 linux1 kernel: debug: reserved 1 areas of 4 pages for debugging qdio_setup Jan 17 16:40:32 linux1 kernel: debug: reserved 2 areas of 4 pages for debugging qdio_labs Jan 17 16:40:32 linux1 kernel: debug: reserved 1 areas of 2 pages for debugging qdio_sense Jan 17 16:40:32 linux1 kernel: debug: reserved 2 areas of 4 pages for debugging qdio_trace , Jan 17 16:41:07 linux1 kernel: qdio: loading QDIO base support Jan 17 16:41:07 linux1 kernel: debug: reserved 1 areas of 4 pages for debugging qdio_setup Jan 17 16:41:07 linux1 kernel: debug: reserved 2 areas of 4 pages for debugging qdio_labs Jan 17 16:41:07 linux1 kernel: debug: reserved 1 areas of 2 pages for debugging qdio_sense Jan 17 16:41:07 linux1 kernel: debug: reserved 2 areas of 4 pages for debugging qdio_trace That's it. An ifconfig fails for either name eth0 or hsi0 any help would be greatly appreciated. ifconfig eth0 up eth0: unknown interface: No such device ifconfig hsi0 up hsi0: unknown interface: No such device Here are some of the key config files.... System config: define lan vlan1 maxconn 100 ownerid system User Directory: PROFILE LINDFLT SPECIAL C000 CTCA SPECIAL C001 CTCA SPECIAL 500 HIPER 3 SYSTEM VLAN1 SPOOL 000C 2540 READER SPOOL 000D 2540 PUNCH A SPOOL 000E 1403 A CONSOLE 009 3215 T TSTTWS LINK MAINT 0190 0190 RR LINK MAINT 019D 019D RR LINK TCPIP 0592 0592 RR * tcpip client code LINK MAINT 019E 019E RR * USER LINUX1 ****** 128M 2046M G INCLUDE LINDFLT IPL CMS PARM AUTOCR MACHINE ESA MDISK 0191 3390 0460 0010 LNS001 MR ALL SOME FEW * LINUX1'S A DISK MDISK 1000 3390 0470 0200 LNS001 MR ALL SOME FEW * LINUX1'S ROOT MDISK 1010 3390 0670 0200 LNS001 MR ALL SOME FEW * LINUX1'S TMP MDISK 1020 3390 0870 0050 LNS001 MR ALL SOME FEW * LINUX1'S VAR MDISK 1030 3390 0001 3337 LNS006 MR ALL SOME FEW * USR MDISK 9000 3390 0200 0199 LNS004 MR ALL SOME FEW * LINUX1'S SWAP FILE *LINK LINUX0 1030 1030 RR * LINUX0'S USR - READ LINK LINUX0 1040 1040 RR * LINUX0'S KBCOMMON - modules.conf (Only what we added/modified) alias hsi0 qeth alias eth0 qdio #cp q v osa linux1:~ # CP Q V OSA OSA 0500 ON NIC 0500 UNIT 000 SUBCHANNEL = 0009 0500 QDIO-ELIGIBLE OSA 0501 ON NIC 0500 UNIT 001 SUBCHANNEL = 000A 0501 QDIO-ELIGIBLE OSA 0502 ON NIC 0500 UNIT 002 SUBCHANNEL = 000B 0502 QDIO-ELIGIBLE 'just making sure we are coupled..... #CP COUPLE 0500 TO SYSTEM VLAN1 CP COUPLE 0500 TO SYSTEM VLAN1 HCPCPL2788E NIC 0500 not connected; already connected to LAN SYSTEM VLAN1
