Scott, No, don't rebuild. For the time being do a "service ipchains stop" command. Well, before that, do this: ipchains -L -n
and _then_ do the stop. Email me the resulting output, and I'll see if I can diddle with the rules a little for you. Mark Post -----Original Message----- From: Ledbetter, Scott E [mailto:[EMAIL PROTECTED]] Sent: Monday, February 04, 2002 2:29 PM To: [EMAIL PROTECTED] Subject: Re: RedHat Login Mark appears to be the winner. Yes, I did select firewall security level 'Medium' when generating the system. It sounded good, anyway. So I'm guessing it would be easier at this point to rebuild than to try to undo what has been done? What should I enter for this prompt for a system that lives behind a corporate firewall? Thanks for the help, Scott Ledbetter StorageTek -----Original Message----- From: Post, Mark K [mailto:[EMAIL PROTECTED]] Sent: February 04, 2002 12:14 PM To: [EMAIL PROTECTED] Subject: Re: RedHat Login Michael, Scott, This sounds more like a firewall issue. When you did the install, what did you select for your "security level?" "Medium" doesn't allow these sort of connections. Mark Post -----Original Message----- From: Coffin Michael C [mailto:[EMAIL PROTECTED]] Sent: Monday, February 04, 2002 1:55 PM To: [EMAIL PROTECTED] Subject: Re: RedHat Login Hi Scott, Are you trying to login as 'root' or somebody else? When you FTP or Telnet to your Linuxes IP address - do you get the login prompt (so your connection is good)? Try logging in as somebody other than root. Take a look at /etc/security/access.conf and make sure you are enabling logins. Michael Coffin, VM Systems Programmer Internal Revenue Service - Room�6030 1111 Constitution Avenue, N.W. Washington, D.C.� 20224 Voice: (202)�927-4188�� FAX:� (202) 622-6726 [EMAIL PROTECTED] <mailto:[EMAIL PROTECTED]> -----Original Message----- From: Ledbetter, Scott E [mailto:[EMAIL PROTECTED]] Sent: Monday, February 04, 2002 1:47 PM To: [EMAIL PROTECTED] Subject: RedHat Login All, I have generated a RedHat 7.2 system for use under VM. I am using a VM guest id that works fine with SuSE 7.0. The /etc/xinetd.d config files for telnet, rsh, rlogin all have disable=yes. I changed them to disable=no (I am behind a firewall) and did both 'service xinetd restart' and rebooted, but I still get 'connection refused' when trying to login using any of the services. Is it intended with the default install to not be able to do a network login? I can ping the RedHat system's IP address fine from everywhere that I need to access the system. Thanks, Scott Ledbetter StorageTek
