I am experiencing a problem installing RedHat Linux for S/390 ver. 7.2 in LPAR mode. We are trying to use an ATM OSA Express card that runs in TR LAN emulation. The network device is at E100 and relative port 0. When the following configuration question comes up I ve tried unsuccessfully to configure the OSA. What is the correct response to the following question?
Please enter any parameters you need to pass to the channel device layer. This includes the I/O ports of your ctc, escon and lcs devices, (e.g. ctc0, 0x600, 0x601 will activate the ctc0 interface at I/O ports 0x600, 0x601): After valid default gateway response is entered the following error messages appear. Error: no lcs module found SIOCSIFNETMASK: No such device SIOCSIFBRDADDR: No such device Tr0: unknown interface: No such device SIOCADDRT: No such device SIOCADDRT: No such device Some additional info: Please enter the network device you intend to use (e.g. ctc0, escon0, iucv0, et0, tr0): I responded with tr0 Previously installed the SUSE Linux S/390 version by responding to installation questions Select your type of network device - 1 for osa token ring Network device number - E100 Enter relative port - 0 Thanks, Ken Maxtutis Sr. Systems Consultant Konica Business Technologies Windsor, CT USA (860)683-2222 X2363 email:[EMAIL PROTECTED]
