I have stop all the raid and started the configuration from scratch and now I get the following error [root@lnx1 mnt]# mkraid --really-force /dev/md0 DESTROYING the contents of /dev/md0 in 5 seconds, Ctrl-C if unsure! handling MD device /dev/md0 analyzing super-block /dev/dasdc1: device too small (0kB) mkraid: aborted, see the syslog and /proc/mdstat for potential clues.
This worked before Please assist moloko > -----Original Message----- > From: Georg Zumstrull [SMTP:[EMAIL PROTECTED]] > Sent: 05 March 2002 19:07 > To: [EMAIL PROTECTED] > Subject: Re: Raid0/MD > > Are you sure it "hangs"? I think "Repair #" could be the maintenance prompt. > I don't know RH linux, but it seems as if there is a problem while checking > or mounting the root filesystem. Because of this you end up in maintenance > mode with the root filesystem mounted readonly and now have the chance to > fix the problem (eg. run e2fsck). > > Georg > > > -----Original Message----- > > From: Linux on 390 Port [mailto:[EMAIL PROTECTED]]On Behalf Of > > Moloko Monyepao > > Sent: Tuesday, March 05, 2002 12:24 PM > > To: [EMAIL PROTECTED] > > Subject: Raid0/MD > > > > > > I have enabled Raid0 on my RH7.2 linux system and when I reboot > > it comes back with the following > > > > Enter root password to start maintenance: after I entered the > > password it hangs on: Repair #1 > > > > Is there anyway that I can fix this. > > > > You assistance will be highly appreciated . > > Moloko
