Max, The fact that you're getting traffic back and forth between your desktop and the system means that the basic configuration is OK: "If I send a wrong password system send me a message with invalid Login!!!!" What might be keeping you from proceeding with your installation, I really don't know.
If you can ping your desktop from the SuSE 7.0 system, and the SuSE 7.0 system from your desktop, that might show you if you're getting very long network times. What that will tell us I don't know, but hey... If you logon with the userid and password of root, you should be able to see that from the VM console by doing a "ps ax" command. Check to make sure you have all your VM TCP/IP maintenance installed. Check this at http://www.vm.ibm.com/related/tcpip/tclnxsvc.html Mark Post -----Original Message----- From: Massimiliano Belardi [mailto:[EMAIL PROTECTED]] Sent: Tuesday, May 28, 2002 4:23 AM To: [EMAIL PROTECTED] Subject: Re: SuSE 7.0 Installation Telnet Problem I decreased to 1024 the MTU size but problem isn't solved. Trying a lower value a get erroro during communication. Is there a suggestion about mtu size value? Is possible that the problem is caused for some PTF not installed on VM? I have vmesa 2.3 I have also another kind of configuration about TCPIP networking. I've not an OSA attached on VM. I've a ctc connection between VM and OS390 from an IP addree to an IP address. To communicate between Linux and VM, network specialist configured a virtual ctc between Linux and another IP address of VM. So there are two IP on VM environment. One to communicate with OS390 and one to communicate with Linux. I've some doubt about this conf. May ths configuration create problem with telnet??? Thank's to everybody! Max ----- Original Message ----- From: "Sergey Korzhevsky" <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]> Sent: Friday, May 24, 2002 2:31 PM Subject: Re: SuSE 7.0 Installation Telnet Problem > Maybe log messages on system console of Linux (under VM 3270 screen) can > explain your problem. If no, check MTU size of TCP/IP under Linux and VM, > and decrease it. > > > WBR, Sergey > > > > Massimiliano > Belardi To: [EMAIL PROTECTED] > <mabelardi.ibm@ cc: > sogei.it> Subject: SuSE 7.0 Installation Telnet Problem > Sent by: Linux > on 390 Port > <[EMAIL PROTECTED] > ARIST.EDU> > > > 24.05.02 13:17 > Please respond > to Linux on 390 > Port > > > > > > > Hello, > I'm experienced a new "strange" problem. I'm just running the first istance > on a VM/ESA 2.3, after run LIN EXEC file, I set up network and root > password for the installation. After complete the initial configuration, I > try to telnet with PuTTY to Linux but after send password I receive NO > response. Netstat command show the connection between Linux and PC where > I'm trying to login is established. > Somebody experienced this problem? > > Thank's > Max > > PS.. If I send a wrong password system send me a message with invalid > Login!!!!
