ENV : SLES 7(kernel 2.4.17) patch 2002/04/30 fixd I try GUEST LAN envierament with 2.4.17. But do not connect to GUEST LAN(HiperSockets) Device:hsi0 is not recognized in SLES7 Please advice me.
<< boot msg >> $B%m (Bm $B%m (Bm Initializing random number generator 7 $B%m (B80C $B%m (B10D $B%m (B1;32mdone $B%m (Bm 8 $B%m (Bm $B%m (Bm Setting up network device iucv0: IUCV lowlevel driver Version: 1.32 initialized iucv0: 'TCPIP' NETIUCV driver Version: 1.17 initialized 7 $B%m (B80C $B%m (B10D $B%m (B1;32mdone $B%m (Bm 8 Setting up network device hsi0: qdio: loading QDIO base support version 2 ($Revision: 1.105 $/$Revision: 1.50 $ debug: qdio_setup: new level 2 debug: qdio_labs: new level 2 debug: qdio_sense: new level 2 debug: qdio_trace: new level 2 qeth: loading qeth S/390 OSA-Express driver ($Revision: 1.136.2.6 $/$Revision: .53.2.2 $/$Revision: 1.18 $) qeth: allocated 0 spare buffers debug: qeth_setup: new level 3 debug: qeth_misc: new level 2 debug: qeth_data: new level 2 debug: qeth_control: new level 2 debug: qeth_sense: new level 2 debug: qeth_qerr: new level 2 debug: qeth_trace: new level 2 qeth: Trying to use card with devnos 0x1800/0x1801/0x1802 qdio : Adapter interruption facility not installed. qdio : Not all CHSCs supported. Continuing. qdio : establish queues on irq 000f: didn't get device end: dstat=68, cstat=0f, flags=18020000 qeth: There were problems in hard-setting up the card. qdio: QDIO base support version 2 ($Revision: 1.105 $/$Revision: 1.50 $): module removed insmod: /lib/modules/2.4.17/kernel/drivers/s390/net/qeth.o: init_module: No such device insmod: Hint: insmod errors can be caused by incorrect module parameters, including invalid IO or IRQ parameters insmod: /lib/modules/2.4.17/kernel/drivers/s390/net/qeth.o: insmod hsi0 failed SIOCSIFADDR: No such device qdio: loading QDIO base support version 2 ($Revision: 1.105 $/$Revision: 1.50 $) debug: qdio_setup: new level 2 debug: qdio_labs: new level 2 debug: qdio_sense: new level 2 debug: qdio_trace: new level 2 qeth: loading qeth S/390 OSA-Express driver ($Revision: 1.136.2.6 $/$Revision: 1 .53.2.2 $/$Revision: 1.18 $) qeth: allocated 0 spare buffers debug: qeth_setup: new level 3 debug: qeth_misc: new level 2 debug: qeth_data: new level 2 debug: qeth_control: new level 2 debug: qeth_sense: new level 2 debug: qeth_qerr: new level 2 debug: qeth_trace: new level 2 qeth: Trying to use card with devnos 0x1800/0x1801/0x1802 qdio : Adapter interruption facility not installed. qdio : Not all CHSCs supported. Continuing. qdio : establish queues on irq 000f: didn't get device end: dstat=68, cstat=0f, flags=18020000 qeth: There were problems in hard-setting up the card. qdio: QDIO base support version 2 ($Revision: 1.105 $/$Revision: 1.50 $): module removed insmod: /lib/modules/2.4.17/kernel/drivers/s390/net/qeth.o: init_module: No such device insmod: Hint: insmod errors can be caused by incorrect module parameters, including invalid IO or IRQ parameters insmod: /lib/modules/2.4.17/kernel/drivers/s390/net/qeth.o: insmod hsi0 failed hsi0: unknown interface: No such device qdio: loading QDIO base support version 2 ($Revision: 1.105 $/$Revision: 1.50 $) insmod: /lib/modules/2.4.17/kernel/drivers/s390/net/qeth.o: init_module: No such device insmod: Hint: insmod errors can be caused by incorrect module parameters, including invalid IO or IRQ parameters insmod: /lib/modules/2.4.17/kernel/drivers/s390/net/qeth.o: insmod hsi0 failed SIOCSIFMTU: No such device qdio: loading QDIO base support version 2 ($Revision: 1.105 $/$Revision: 1.50 $) <</etc/rc.config>> NETCONFIG="_0 _1" IPADDR_0="9.68.67.21" IPADDR_1="192.168.0.21" NETDEV_0="iucv0" NETDEV_1="hsi0"IFCONFIG_0="9.68.67.21 pointopoint 9.68.67.17 mtu 1500 up" IFCONFIG_1="192.168.0.21 broadcast 192.168.0.255 netmask 255.255.255.0 mtu 1500 up" <</etc/chandev.conf>> qeth0,0x1800,0x1801,0x1802,0,0,0 add_parms,0x10,0x1800,0x1802,portname:LINUX00 <</etc/modules.conf>> alias hsi0 qeth Linux Service Promotion IBM Global Service-Japan Tel: +81-03-5614-5116 ID: [EMAIL PROTECTED], IBM T/L: 1719-5116, IBM M/C: ST-4L2
