Well our ramacs are not working. There is no dasd or 3990 info in /proc/subchannels after the dasd is loaded from yast. /proc/dasd/devices shows the 3380 with an "unknown status". No insmods, rmmods modprobes etc. change that symptom. mknod comes back with a message indicating that the 94:0 is already registered..but the linux console messages say otherwise!!
I am wondering if 3990-13 might be the problem???
Do you use mod 13 controllers on your ramac??
Dave Myers
Denver Solutions Group
Senior Systems Engineer
Office Phone:�� (303) 996-7112
Cellular Phone: (303) 619-0782
Home Office:��� (303) 948-0027
Fax:����������������� (303) 706.1713
e-mail: [EMAIL PROTECTED]
Tom Duerbusch
<[EMAIL PROTECTED] To: [EMAIL PROTECTED]
scity.com> cc:
Sent by: Linux on Subject: Re: SLES8 dasdfmt problem
390 Port
<[EMAIL PROTECTED]
ST.EDU>
06/04/2003 08:33
AM
Please respond to
Linux on 390 Port
Don't worry about the Ramacs. I have Suse 8 loaded on both 3380 and
3390 Ramac Dasd Subsystems, as well as MP3000 internal dasd.
I haven't had to add disk. Mine were added durning installation.
I assume that you went to the Suse website. There is a paper on adding
S390 dasd to a running Linux system. That worked for me when I added
dasd to Linux 7.
Tom Duerbusch
THD Consulting
