Moloko,
probably you havn't installed the dasd_eckd_mod? check with lsmod!
I think you ned to install the module!
modprobe dasd_eckd_mod
with kind regards
Simon
e-mail: [EMAIL PROTECTED]
Holger
Smolinski/Germany To: [EMAIL PROTECTED]
/[EMAIL PROTECTED] cc:
Sent by: Linux on Subject: Re: Adding Dasd
390 Port
<[EMAIL PROTECTED]
IST.EDU>
04.09.03 18:16
Please respond to
Linux on 390 Port
Moloko,
you may want to check /proc/subchannels, whether the DASD
has really been attached to your system, and whether there is
a path available (boolean AND of PIM/PAM/POM). If so, a
'echo "set 7240 on" > /proc/dasd/devices' may make the DASD
visible to the DASD driver.
Best Regards
Holger Smolinski
--
Dr. Holger Smolinski, Linux on zSeries
IBM Deutschland Entwicklung GmbH,Sch�naicher Str. 220, 71032 B�blingen
FAX: +49-7031-16-3456, Tel. +49-7031-16-4652
Moloko Monyepao
<[EMAIL PROTECTED] To:
[EMAIL PROTECTED]
ivia.co.za> cc:
Sent by: Linux on Subject: Adding Dasd
390 Port
<[EMAIL PROTECTED]
T.EDU>
15.08.03 09:41
Please respond to
Linux on 390 Port
I am trying to add dasd volumes on SuSe Interprice Server 8, the following
is the status of theof my volumes, when I try to do
fdasd /dev/dasdk i get the following Error
lnx1:/boot/zipl # fdasd /dev/dasdk
fdasd error: open error
Could not open device '/dev/dasdk' in read-only mode!
When trying dasdfmt I get the following
lnx1:/boot/zipl # dasdfmt -b 4096 -f /dev/dasdk
dasdfmt: Unable to open device /dev/dasdk: No such device
7240(none) at ( 94: 40) is dasdk : unknown
7241(none) at ( 94: 44) is dasdl : unknown
7242(none) at ( 94: 48) is dasdm : unknown
7243(none) at ( 94: 52) is dasdn : unknown
7244(none) at ( 94: 56) is dasdo : unknown
7245(none) at ( 94: 60) is dasdp : unknown
7246(none) at ( 94: 64) is dasdq : unknown
Please assist
Moloko Monyepao
OS390 System Programmer
arivia.kom
Tel : +27 11 800 3372
NOTICE: Please note that this eMail, and the contents thereof, is subject
to the standard arivia.kom email disclaimer which may be found at:
http://www.arivia.co.za/disclaimer.htm. If you cannot access the
disclaimer through the URL attached, and you wish to receive a copy
thereof, please send an eMail to [EMAIL PROTECTED] or call (011)
233-0800. You will receive the disclaimer by return email or fax.
