Eric, Your HOST= parameter line looks a little suspect. I believe the last value is supposed to be the MTU size for the network device, not an IP address of some kind.
Also, you can only have 11 card images in your parmfile. Try combining a couple to get down to that number. Mark Post -----Original Message----- From: Wilson, Eric [mailto:[EMAIL PROTECTED] Sent: Friday, October 10, 2003 11:46 AM To: [EMAIL PROTECTED] Subject: parm entries at install I'm installing RHv 7.2 on a z/800. I have, what I feel, is a proper parm file, but it keeps asking me for the FQDN. Have got something wrong? 00001 root=/dev/ram0 ro ip=off DASD=200-206,300-301 vmpoff=LOGOFF 00002 ramdisk_size=20480 00003 chandev=ctc0,0x2000,0x2001 00004 CHANDEV=ctc0,0x2000,0x2001 00005 HOST=server.sub.domain.com:ctc0:1.2.3.4:1.2.3.1 00006 NETWORK=1.2.3.4:255.255.255.0:1.2.3.255:1.2.3.1 00007 DNS=1.2.3.5.x 00008 SEARCHDNS=server.sub.domain.com 00009 RPMSERVER=nfsserver:/s390 00010 MOUNTS=/dev/dasda1:/boot,/dev/dasdb1:/,/dev/dasdc1:/usr,/dev/dasd1:/tmp 00011 INSTALL=server DTZ=CET 00012 LANG=en_US 00013 DEBUG=1 00014 * * * End of File * * * Any insight would be great! Cheers; E! ----------------- Eric Wilson IBM Certified Advanced Technical Expert RedHat Certified Engineer .~. /V\ /( )\ ^^-^^
