Hi,
We have the evaluation copy of SuSE LINUX Enterprise Server 8. We went
through the install process and it did not show any ertror messages. On
the screen were it is loading the software it shows the percentage of data
read from the CD. (We are using NFS to mount the CD) The screen flashed a
lot, but the percentage stays at 0%. It then goes to a screen that tells
you to reboot. When we IPL, it does not start. It appears that the boot
area has not been loaded.
When I look at the 3270 console logs, I noticed one error about missing VM
support. This did not appear on SuSE 7 installs. Did anyone else have
problems on the initial install? Are there any service packs? We just
received the CDs just before Christmas.
Thanks,
Ken Vance
Amadeus
dasd: initialization finished
dasd(eckd): ECKD discipline initializing
dasd(eckd): /dev/dasda ( 94: 0),[EMAIL PROTECTED]: 3390/0A(CU:3990/01) Cyl:3338
Head:15
Sec:224
dasd(eckd): /dev/dasda ( 94: 0),[EMAIL PROTECTED]: DIAG210 returned VRDCRCCL = 04,
VRDCC
RTY = 82, VRDCCRFT = 82
dasd(eckd): /dev/dasda ( 94: 0),[EMAIL PROTECTED]: XRC_supported reset because of
missin
g VM support
dasd(eckd): /dev/dasda ( 94: 0),[EMAIL PROTECTED]: 3390/0A(CU:3990/01):
Configuration da
ta read
debug: dasda: new level 3
dasd(eckd): /dev/dasdb ( 94: 4),[EMAIL PROTECTED]: 3390/0A(CU:3990/01) Cyl:3338
Head:15
Sec:224
dasd(eckd): /dev/dasdb ( 94: 4),[EMAIL PROTECTED]: DIAG210 returned VRDCRCCL = 04,
VRDCC
RTY = 82, VRDCCRFT = 82
dasd(eckd): /dev/dasdb ( 94: 4),[EMAIL PROTECTED]: XRC_supported reset because of
missin
g VM support
......
User ACRS: 4026f140 00000000 00000000 00000000
00000000 00000000 00000000 00000000
00000000 00000000 00000000 00000000
00000000 00000000 00000000 00000000
User Code: 58 40 50 00 58 10 40 10 0d e1 58 30 d0 30 41 20 f0 88 58 1c
/usr/lib/YaST2/bin/YaST2: line 303: 938 Segmentation fault y2base
"$modu
-geometry 800x600 $qt_bg
umount: /mnt: device is busy
umount: /var/adm/mount: not mounted
*** An error occurred during the installation!
Main menu
1) Settings
2) System information
3) Kernel modules (hardware drivers)
4) Start installation / system
5) Exit / Reboot
....
00: CP IPL 201
00: HCPGIR450W CP entered; disabled wait PSW 000A0000 0000000F
