I have just installed Redhat RHEL3 via FTP. The boot loader activates and
uses my QDIO/QETH guest lan just fine but after installing and rebooting I
recevie the folloing message:
network: Setting network parameters: succeeded
ifup: Cannot get driver information: Operation not supported
I then try a modprobe qeth and receive the following:
qdio: loading QDIO base support version 2 ($Revision: 1.145 $/$Revision:
1.57 $)
qeth: loading qeth S/390 OSA-Express driver ($Revision: 1.337 $/$Revision:
1.113
$/$Revision: 1.42 $:VLAN)
/lib/modules/2.4.21-4.EL/kernel/drivers/s390/net/qeth.o: init_module: No
such de
vice
Hint: insmod errors can be caused by incorrect module parameters, including
inva
lid IO or IRQ parameters.
You may find more information in syslog or the output from dmesg
/lib/modules/2.4.21-4.EL/kernel/drivers/s390/net/qeth.o: insmod
/lib/modules/2.4
.21-4.EL/kernel/drivers/s390/net/qeth.o failed
qdio: QDIO base support version 2 ($Revision: 1.145 $/$Revision: 1.57 $):
module
removed
/lib/modules/2.4.21-4.EL/kernel/drivers/s390/net/qeth.o: insmod qeth failed
Anyone have any ideas what is missing or is misconfigured? I am at a loss
especially since the installation boot kernel works fine but the installed
version does not.
Thanks,
Al Schilla
State of Minnesota
