Steve,
This caught my eye:
ActMtu: 32760
The ifconfig output from your first note showed this:
UP POINTOPOINT RUNNING NOARP MTU:1500 Metric:1
The two values need to match.
Mark Post
-----Original Message-----
From: Linux on 390 Port [mailto:[EMAIL PROTECTED] On Behalf Of Steve
Bui
Sent: Tuesday, March 23, 2004 10:22 AM
To: [EMAIL PROTECTED]
Subject: Re: CTC between linux & zOS.
I tried both 0 or 1 with no success.
Netstat dev on zOS shows:
DevName: CTC3X7 DevType: CTC DevNum: 0B72
DevStatus: Ready
LnkName: CTC37 LnkType: CTC LnkStatus: Ready
NetNum: 1 QueSize: 0
BytesIn: 0 BytesOut: 0
ActMtu: 32760
BSD Routing Parameters:
MTU Size: 00000 Metric: 00
DestAddr: 10.0.3.2 SubnetMask: 255.255.255.0
Multicast Specific:
Multicast Capability: Yes
Group RefCnt
----- ------
224.0.0.1 0000000001
-------------------------
---SB
On Monday, 03/22/2004 at 10:18 EST, "Post, Mark K" <[EMAIL PROTECTED]>
wrote:
> Correct me if I'm wrong (I haven't played with MVS TCPIP definitions
much),
> but in this statement:
> LINK CTC37 CTC 1 CTC3X7
> doesn't the "1" say to swap the read channel with the write channel?
> If
so,
> I would think that is your problem, since the entry in chandev.conf
> ctc0,0x0d33,0x0d32,0,3 says to do exactly the same thing. The fact
> that the ifconfig output
you
> show lists 5 errors, all of them "carrier" errors would seem to bear
this
> out.
Also use NETSTAT DEV (onetstat?) on the z/OS side to find out what the
status of the CTC. Alan Altmark Sr. Software Engineer IBM z/VM Development
----------------------------------------------------------------------
For LINUX-390 subscribe / signoff / archive access instructions, send email
to [EMAIL PROTECTED] with the message: INFO LINUX-390 or visit
http://www.marist.edu/htbin/wlvindex?LINUX-390
----------------------------------------------------------------------
For LINUX-390 subscribe / signoff / archive access instructions,
send email to [EMAIL PROTECTED] with the message: INFO LINUX-390 or visit
http://www.marist.edu/htbin/wlvindex?LINUX-390
