Thanks for all the great responses...consider it stricken ;) Dave
-----Original Message----- From: Linux on 390 Port [mailto:[EMAIL PROTECTED] Behalf Of Alan Altmark Sent: Thursday, April 15, 2004 1:21 PM To: [EMAIL PROTECTED] Subject: Re: VSWITCH Connections On Thursday, 04/15/2004 at 12:18 EST, David Booher <[EMAIL PROTECTED]> wrote: > Hello, > > Great thread! I'm also going to implement VSWITCH tonight, but I understood > the PROFILE TCPIP change to be something like this: > > VSWITCH CONTROLLER ON 0104 0106 > > where a range of addresses (triplet) is used. Am I wrong? If you are really dead set on specifying the device range, yes, it's a triplet. Easier is to leave off the device numbers altogether. Then the controller will service any VSWITCH you want. Alan Altmark Sr. Software Engineer IBM z/VM Development ---------------------------------------------------------------------- For LINUX-390 subscribe / signoff / archive access instructions, send email to [EMAIL PROTECTED] with the message: INFO LINUX-390 or visit http://www.marist.edu/htbin/wlvindex?LINUX-390 ---------------------------------------------------------------------- For LINUX-390 subscribe / signoff / archive access instructions, send email to [EMAIL PROTECTED] with the message: INFO LINUX-390 or visit http://www.marist.edu/htbin/wlvindex?LINUX-390
