Hi James, The REXECD server in VM if of no use to me. Its for receiving REXEC calls from outside the VM SYSTEM. I have EXECs in CMS that want to pass paramaters to shells on Linux. I was using REXEC, I want some other way of doing this.
Crispin Hugo Systems Programmer, Macro 4 <http://www.macro4.com/> Macro 4 plc, The Orangery, Turners Hill Road, Worth, Crawley, RH10 4SS Direct Line: +44 (0)1293 872121 Switchboard: +44 (0) 1293 872000 Fax: +44 (0) 1293 872001 This message contains confidential information and is intended only for the individual named. If you are not the named addressee you should not disseminate, distribute or copy this e-mail. Please notify the sender immediately by e-mail if you have received this e-mail by mistake and delete this e-mail from your system. E-mail transmission cannot be guaranteed to be secure or error-free as information could be intercepted, corrupted, lost, destroyed, arrive late or incomplete, or contain viruses. The sender therefore does not accept liability for any errors or omissions in the contents of this message which arise as a result of e-mail transmission. If verification is required please request a hard-copy version. This message is provided for informational purposes and should not be construed as a solicitation, offer or acceptance of any offer. > -----Original Message----- > From: James Tison [mailto:[EMAIL PROTECTED] > Sent: 13 May 2004 15:32 > To: [EMAIL PROTECTED] > Subject: Re: REXEC revisited > > > Oh. __VM__ ... I'm sorry, I mis-read you. I thought you had a Linux > complaint. > > There is an REXECD disconnected virtual machine that should be running > in order to provide the rexecd function on VM. If it's running and > still can't open port 512, then you'll need to have a VM systems guru > look over its configuration -- I have no idea what > authorizations might > be required for a VM guest to open a reserved (p < 1024) port. > > Apologies, > --Jim-- > James S. Tison > Senior Software Engineer > TPF Laboratory / Architecture > IBM Corporation > "If dogs don't go to heaven, then, when I die, I want to go where they > do." > -- Will Rogers > > > > Crispin Hugo <[EMAIL PROTECTED]> > Sent by: Linux on 390 Port <[EMAIL PROTECTED]> > 05/13/2004 09:49 > Please respond to > Linux on 390 Port > > > To > [EMAIL PROTECTED] > cc > > Subject > Re: REXEC revisited > > > > > > > Hi James, > I would love to use SSHD, it doesn't exist under VM. > > Crispin Hugo > Systems Programmer, Macro 4 > <http://www.macro4.com/> > Macro 4 plc, The Orangery, Turners Hill Road, Worth, Crawley, RH10 4SS > Direct Line: +44 (0)1293 872121 Switchboard: +44 (0) 1293 872000 > Fax: +44 (0) 1293 872001 > This message contains confidential information and is > intended only for > the > individual named. If you are not the named addressee you should not > disseminate, distribute or copy this e-mail. Please notify the sender > immediately by e-mail if you have received this e-mail by mistake and > delete > this e-mail from your system. E-mail transmission cannot be > guaranteed to > be > secure or error-free as information could be intercepted, > corrupted, lost, > destroyed, arrive late or incomplete, or contain viruses. The sender > therefore does not accept liability for any errors or omissions in the > contents of this message which arise as a result of e-mail > transmission. > If > verification is required please request a hard-copy version. > This message > is > provided for informational purposes and should not be construed as a > solicitation, offer or acceptance of any offer. > > > > > -----Original Message----- > > From: James Tison [mailto:[EMAIL PROTECTED] > > Sent: 13 May 2004 14:46 > > To: [EMAIL PROTECTED] > > Subject: Re: REXEC revisited > > > > > > I have no idea what broke you in z/VM 4.4. We have SLES 8 running > > under z/VM 4.4, and rexecd works exactly as it's supposed to. Any > > chance your VM LPAR's ROUTED or other communications control-class > > disconnected virtual service machines got massively reconfigured? > > > > sshd is a great alternative to rexecd, BTW. > > > > Regards, > > --Jim-- > > James S. Tison > > Senior Software Engineer > > TPF Laboratory / Architecture > > IBM Corporation > > "If dogs don't go to heaven, then, when I die, I want to go > where they > > do." > > -- Will Rogers > > > > Linux on 390 Port <[EMAIL PROTECTED]> wrote on > > 05/13/2004 09:29:27: > > > > > I have been using REXEC from VM to Linux to run a shell in > > Linux. Having > > > moved to z/VM 4.4 from z/VM 4.3 REXEC no longer works. > > Anybody got any > > > RELIABLE alternatives to using REXEC to pass paramters to > a shell in > > Linux. > > > > > > Crispin Hugo > > > Systems Programmer, Macro 4 > > > <http://www.macro4.com/> > > > Macro 4 plc, The Orangery, Turners Hill Road, Worth, > > Crawley, RH10 4SS > > > Direct Line: +44 (0)1293 872121 Switchboard: +44 (0) 1293 872000 > > > Fax: +44 (0) 1293 872001 > > > This message contains confidential information and is > > intended only for > > the > > > individual named. If you are not the named addressee you > should not > > > disseminate, distribute or copy this e-mail. Please notify > > the sender > > > immediately by e-mail if you have received this e-mail by > > mistake and > > delete > > > this e-mail from your system. E-mail transmission cannot be > > guaranteed > > to be > > > secure or error-free as information could be intercepted, > corrupted, > > lost, > > > destroyed, arrive late or incomplete, or contain viruses. > The sender > > > therefore does not accept liability for any errors or > > omissions in the > > > contents of this message which arise as a result of e-mail > > transmission. > > If > > > verification is required please request a hard-copy version. This > > message is > > > provided for informational purposes and should not be > construed as a > > > solicitation, offer or acceptance of any offer. > > > > > > > > > > > > > > > > > > > > > ---------------------------------------------------------------------- > > > For LINUX-390 subscribe / signoff / archive access instructions, > > > send email to [EMAIL PROTECTED] with the message: INFO > > LINUX-390 or > > visit > > > http://www.marist.edu/htbin/wlvindex?LINUX-390 > > > > > ---------------------------------------------------------------------- > > For LINUX-390 subscribe / signoff / archive access instructions, > > send email to [EMAIL PROTECTED] with the message: INFO > > LINUX-390 or visit > > http://www.marist.edu/htbin/wlvindex?LINUX-390 > > > > ______________________________________________________________ > > __________ > > This email has been scanned for all known viruses by the > > MessageLabs Email Security Service and the Macro 4 plc > > internal virus protection system. > > ______________________________________________________________ > > __________ > > > > ---------------------------------------------------------------------- > For LINUX-390 subscribe / signoff / archive access instructions, > send email to [EMAIL PROTECTED] with the message: INFO > LINUX-390 or > visit > http://www.marist.edu/htbin/wlvindex?LINUX-390 > > ---------------------------------------------------------------------- > For LINUX-390 subscribe / signoff / archive access instructions, > send email to [EMAIL PROTECTED] with the message: INFO > LINUX-390 or visit > http://www.marist.edu/htbin/wlvindex?LINUX-390 > > ______________________________________________________________ > __________ > This email has been scanned for all known viruses by the > MessageLabs Email Security Service and the Macro 4 plc > internal virus protection system. > ______________________________________________________________ > __________ > ---------------------------------------------------------------------- For LINUX-390 subscribe / signoff / archive access instructions, send email to [EMAIL PROTECTED] with the message: INFO LINUX-390 or visit http://www.marist.edu/htbin/wlvindex?LINUX-390
