What does "dmesg" give you? That is normally where the errors show up that are masked by the startup scripts.
Mark Post -----Original Message----- From: Linux on 390 Port [mailto:[EMAIL PROTECTED] On Behalf Of Richard Pinion Sent: Tuesday, May 18, 2004 2:28 PM To: [EMAIL PROTECTED] Subject: Re: lcs devices under gentoo for s390 OK, I can't figure out what the problem is, here is the boot log and after that are the config files that I have updated. * Calculating module dependencies... [ ok ] * Using /etc/modules.autoload.d/kernel-2.6 as config: * Loading module lcs... [ ok ] * Loading module tape_34xx... [ ok ] * Autoloaded 2 module(s) * Bringing lo up... [ ok ] * Initializing random number generator... [ ok ] INIT: Entering runlevel: 3 * Starting metalog... [ ok ] * Setting DNS domainname to bhset.org... [ ok ] * Bringing eth0 up (172.30.102.17)... SIOCSIFADDR: No such device eth0: unknown interface: No such device SIOCSIFBRDADDR: No such device eth0: unknown interface: No such device SIOCSIFNETMASK: No such device [ !! ] * ERROR: Problem starting needed services. * "netmount" was not started. * ERROR: Problem starting needed services. * "xinetd" was not started. * Starting local... [ ok ] This is linux390.unknown_domain (Linux s390 2.6.5) 19:18:17 linux390 login: ---------------------------------------------------------------------------- ---- /etc/modules.conf has an entry of alias eth0 lcs /etc/modprobe.conf has an entry of alias eth0 lcs ---------------------------------------------------------------------- For LINUX-390 subscribe / signoff / archive access instructions, send email to [EMAIL PROTECTED] with the message: INFO LINUX-390 or visit http://www.marist.edu/htbin/wlvindex?LINUX-390 ---------------------------------------------------------------------- For LINUX-390 subscribe / signoff / archive access instructions, send email to [EMAIL PROTECTED] with the message: INFO LINUX-390 or visit http://www.marist.edu/htbin/wlvindex?LINUX-390
