So.... you would have Linux set up with two QDIO devices.... how do you
configure it so that that the LDAP/DB2 traffic goes into hipersocket
devices address and the rest of it goes to the real ethernet backbone?
"Post, Mark K"
<[EMAIL PROTECTED]
m> To
Sent by: Linux on [EMAIL PROTECTED]
390 Port cc
<[EMAIL PROTECTED]
IST.EDU> Subject
Re: Hipersockets..... a couple of
questions
05/18/2004 02:18
PM
Please respond to
Linux on 390 Port
<[EMAIL PROTECTED]
IST.EDU>
You can most definitely use the HiperSockets. They look like one big
Ethernet pipe to the systems on both sides.
Mark Post
-----Original Message-----
From: Linux on 390 Port [mailto:[EMAIL PROTECTED] On Behalf Of James
Melin
Sent: Tuesday, May 18, 2004 3:14 PM
To: [EMAIL PROTECTED]
Subject: Hipersockets..... a couple of questions
We're continuing in our pilot, and as of the 23rd, we're going onto the
z900
with 2 IFL's and 3 Gigs of ram for the VM environment. (2.5 real, .5
expanded) and we'll be setting up hipersockets
One thign we noticed when we moved fromhaving WAS used the DB2 Connect
Client talking to DB2 connect EE in another LPAR that in turn was talking
to
DB2 on Z/os, to a WAS/DB2 on the guest talking to DB2 on z/os was a 300%
increase in response time just doing THAT alone.
One big area that we still see latency is RACF/LDAP authentication across
the network.
Can hipersockets be used to make RACF/LDAP calls also? We are going to be
configuring z/900 to use hipersockets on z/linux and z/os... I'm just not
sure on what limitations there are on what communications we can send over
them.
----------------------------------------------------------------------
For LINUX-390 subscribe / signoff / archive access instructions, send email
to [EMAIL PROTECTED] with the message: INFO LINUX-390 or visit
http://www.marist.edu/htbin/wlvindex?LINUX-390
----------------------------------------------------------------------
For LINUX-390 subscribe / signoff / archive access instructions,
send email to [EMAIL PROTECTED] with the message: INFO LINUX-390 or
visit
http://www.marist.edu/htbin/wlvindex?LINUX-390
----------------------------------------------------------------------
For LINUX-390 subscribe / signoff / archive access instructions,
send email to [EMAIL PROTECTED] with the message: INFO LINUX-390 or visit
http://www.marist.edu/htbin/wlvindex?LINUX-390
