They are most likely going to be something like this:
brw-------   1 root root  37,   0 2000-01-05 12:59 btibm0
brw-------   1 root root  37,   1 2000-01-05 12:59 btibm1
brw-------   1 root root  37,   2 2000-01-05 12:59 btibm2
crw-------   1 root root  37,   1 2000-01-05 12:59 ntibm0
crw-------   1 root root  37,   3 2000-01-05 12:59 ntibm1
crw-------   1 root root  37,   5 2000-01-05 12:59 ntibm2
crw-------   1 root root  37,   0 2000-01-05 12:59 rtibm0
crw-------   1 root root  37,   2 2000-01-05 12:59 rtibm1
crw-------   1 root root  37,   4 2000-01-05 12:59 rtibm2


Mark Post

-----Original Message-----
From: Linux on 390 Port [mailto:[EMAIL PROTECTED] On Behalf Of Taraka
Srinivas Kumar
Sent: Tuesday, June 01, 2004 10:49 AM
To: [EMAIL PROTECTED]
Subject: Linux 390 tape drive



Hi people,

I was trying to dump some data into a 3490 tape.

I have issued the following commands.
1. modprobe  tape390
2.lsmod

Module                        Size                Used by        Tainted: P
st                                     28136                   0
(autoclean) (unused)
scsi_mod                       89356                   1
(autoclean) [st]
netlink_dev                     2008                   0
(autoclean)
tape_3590_mod                  17964                   0
(autoclean) (unused)
tape_3490_mod                   1320                  0          (autoclean)
(unused)
tape_3480_mod                   1320                   0
(autoclean) (unused)
tape390                        46576                   0
[tape_3590_mod tape_3490_mod tape_3480_mod]
qeth                                  154180           1
qdio                                   33652                   1
[qeth]
ipv6                                  330012          -1          [qeth]
lvm-mod                        70724                   9
(autoclean)
dasd_eckd_mod                  57812                   8
dasd_mod                       49212                   9
[dasd_eckd_mod]


3.cat  /proc/tapedevices

TapeNo  DevNo           CuType  CuModel         DevType         DevMod
BlkSize         State   Op      MedState
0               0E20                    3490                    52
3490            52                      auto                    UNUSED  ---
LOADED
1               0E21                    3490                    52
3490            52                      auto                    UNUSED  ---
UNKNOWN
2               0E00                    3590                    60
3590            11                      auto                    UNUSED  ---
UNKNOWN
3               0E01                    3590                    60
3590            11                      auto                    UNUSED  ---
UNKNOWN
4               0E02                    3590                    60
3590            11                      auto                    UNUSED  ---
UNKNOWN
5               0E03                    3590                    60
3590            11                      auto                    UNUSED  ---
UNKNOWN


4. I want to issue the command " mt -f /dev/????? status "

But i am not sure about /dev/????? name.

How to get these device details ?

Regards,
Srinivas.


----------------------------------------------------------------------
For LINUX-390 subscribe / signoff / archive access instructions,
send email to [EMAIL PROTECTED] with the message: INFO LINUX-390 or visit
http://www.marist.edu/htbin/wlvindex?LINUX-390

Reply via email to