----- Original Message -----
From: "Carsten Otte" <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Wednesday, June 02, 2004 1:59 PM
Subject: Re: Linux 390 tape drive


> Hi,
>
> have a look at /proc/tapedevices. This file is available as soon as you
> loaded your tape390 device driver. It tells you what devno's are currently
> managed by the driver, and what device nodes correspond with them.
>
> with kind regards
> Carsten Otte
> --
> I saw screens of green, red messages too, then came blue, shubidu
> And i think to myself, what a wonderful world
>
>
>
>
> Taraka Srinivas Kumar <[EMAIL PROTECTED]>
> Sent by: Linux on 390 Port <[EMAIL PROTECTED]>
> 01/06/2004 04:49 PM
> Please respond to Linux on 390 Port
>
>
>         To:     [EMAIL PROTECTED]
>         cc:
>         Subject:        Linux 390 tape drive
>
>
>
>
>
> Hi people,
>
> I was trying to dump some data into a 3490 tape.
>
> I have issued the following commands.
> 1. modprobe  tape390
> 2.lsmod
>
> Module                        Size                Used by        Tainted:
> P
> st                                     28136                   0
>  (autoclean) (unused)
> scsi_mod                       89356                   1
>  (autoclean) [st]
> netlink_dev                     2008                   0
>  (autoclean)
> tape_3590_mod                  17964                   0
>  (autoclean) (unused)
> tape_3490_mod                   1320                  0
>  (autoclean) (unused)
> tape_3480_mod                   1320                   0
>  (autoclean) (unused)
> tape390                        46576                   0
>  [tape_3590_mod tape_3490_mod tape_3480_mod]
> qeth                                  154180           1
> qdio                                   33652                   1
>  [qeth]
> ipv6                                  330012          -1          [qeth]
> lvm-mod                        70724                   9
>  (autoclean)
> dasd_eckd_mod                  57812                   8
> dasd_mod                       49212                   9
>  [dasd_eckd_mod]
>
>
> 3.cat  /proc/tapedevices
>
> TapeNo  DevNo           CuType  CuModel         DevType         DevMod
>      BlkSize         State   Op      MedState
> 0               0E20                    3490                    52
>              3490            52                      auto
>    UNUSED  ---     LOADED
> 1               0E21                    3490                    52
>              3490            52                      auto
>    UNUSED  ---     UNKNOWN
> 2               0E00                    3590                    60
>              3590            11                      auto
>    UNUSED  ---     UNKNOWN
> 3               0E01                    3590                    60
>              3590            11                      auto
>    UNUSED  ---     UNKNOWN
> 4               0E02                    3590                    60
>              3590            11                      auto
>    UNUSED  ---     UNKNOWN
> 5               0E03                    3590                    60
>              3590            11                      auto
>    UNUSED  ---     UNKNOWN
>
>
> 4. I want to issue the command " mt -f /dev/????? status "
>
> But i am not sure about /dev/????? name.
>
> How to get these device details ?
>
> Regards,
> Srinivas.
>
>
>
> #### InterScan_Disclaimer.txt has been removed from this note on June 02
> 2004 by Carsten Otte
>
>
> ----------------------------------------------------------------------
> For LINUX-390 subscribe / signoff / archive access instructions,
> send email to [EMAIL PROTECTED] with the message: INFO LINUX-390 or
visit
> http://www.marist.edu/htbin/wlvindex?LINUX-390
>

----------------------------------------------------------------------
For LINUX-390 subscribe / signoff / archive access instructions,
send email to [EMAIL PROTECTED] with the message: INFO LINUX-390 or visit
http://www.marist.edu/htbin/wlvindex?LINUX-390

Reply via email to