Hello,
I use two osa card defined in QDIO mode.
Primary card port 0 and Secondary card port 1 are used in my VSWITCH1,
ip address is 172.18.1.0/24.
Primary card port 1 and Secondary card port 0 are used in my VSWITCH2 ip
address is 192.168.6.0/24.
VSWITCH1 as PRIROUTER set on.
I defined a router linux with eth0 on VSWITCH1 and eth1 on VSWITCH2,
this guest has ip_forward=1 and works like a router between this two
vswitch. There is no problem to ping 172.18.1.x to 192.168.6.x thru this
router for all linux guest.
If I try to ping from a local station on the same lan 172.18.1.16, a
z/vm linux guest 192.168.6.141, packet seems to be blocked by cp.
An idea ?
TIA
Gerard MONTELEONE
Ingenieur Systeme & Reseau
SI.TE.C Z.I du vazzio 20090 AJACCIO
* +33495236809 * +33687727032
www.sitec.fr <http://www.sitec.fr/>
----------------------------------------------------------------------
For LINUX-390 subscribe / signoff / archive access instructions,
send email to [EMAIL PROTECTED] with the message: INFO LINUX-390 or visit
http://www.marist.edu/htbin/wlvindex?LINUX-390
