Hello,
Yes i did. It seems that no routing is possible thru the OSA card. The
packet seems to be blocked by CP.
Gerard MONTELEONE
Ingenieur Systeme & Reseau
SI.TE.C Z.I du vazzio 20090 AJACCIO
( +33495236809 � +33687727032
www.sitec.fr
-----Message d'origine-----
De�: Linux on 390 Port [mailto:[EMAIL PROTECTED] De la part de
Alan Altmark
Envoy�: vendredi 4 juin 2004 16:34
��: [EMAIL PROTECTED]
Objet�: Re: VSWITCH router
On Friday, 06/04/2004 at 04:04 ZE2, Monteleone <[EMAIL PROTECTED]>
wrote:
> Hello,
>
> I use two osa card defined in QDIO mode.
> Primary card port 0 and Secondary card port 1 are used in my VSWITCH1,
> ip address is 172.18.1.0/24.
> Primary card port 1 and Secondary card port 0 are used in my VSWITCH2
ip
> address is 192.168.6.0/24.
>
> VSWITCH1 as PRIROUTER set on.
>
> I defined a router linux with eth0 on VSWITCH1 and eth1 on VSWITCH2,
> this guest has ip_forward=1 and works like a router between this two
> vswitch. There is no problem to ping 172.18.1.x to 192.168.6.x thru
this
> router for all linux guest.
>
> If I try to ping from a local station on the same lan 172.18.1.16, a
> z/vm linux guest 192.168.6.141, packet seems to be blocked by cp.
>
> An idea ?
Did you remember to tell 172.18.1.16 that 192.168.6.0/24 was reachable
through your virtual router? (The purpose of the vswitch is to
eliminate
the need for a virtual router.)
Alan Altmark
Sr. Software Engineer
IBM z/VM Development
----------------------------------------------------------------------
For LINUX-390 subscribe / signoff / archive access instructions,
send email to [EMAIL PROTECTED] with the message: INFO LINUX-390 or
visit
http://www.marist.edu/htbin/wlvindex?LINUX-390
----------------------------------------------------------------------
For LINUX-390 subscribe / signoff / archive access instructions,
send email to [EMAIL PROTECTED] with the message: INFO LINUX-390 or visit
http://www.marist.edu/htbin/wlvindex?LINUX-390
