[EMAIL PROTECTED]:~5 lsmod
Module Size Used by
reiserfs 243712 0 (unused)
jfs 188472 0 (unused)
ext3 73168 0 (unused)
jbd 52056 0 [ext3]
dasd_fba_mod 5340 1 (initializing)
dasd_diag_mod 5996 0 (autoclean) (unused)
dasd_eckd_mod 57896 1 (initializing)
dasd_mod 51036 3 [dasd_fba_mod dasd_diag_mod
dasd_eckd_mod]
qeth 149528 1
qdio 38224 1 [qeth]
[EMAIL PROTECTED]:~6 cat /proc/dasd/devices
0301(none) at ( 94: 0) is dasda : accepted
0302(none) at ( 94: 4) is dasdb : unknown
0303(none) at ( 94: 8) is dasdc : unknown
0304(none) at ( 94: 12) is dasdd : unknown
0305(none) at ( 94: 16) is dasde : unknown
0306(none) at ( 94: 20) is dasdf : unknown
[EMAIL PROTECTED]:~7
"Post, Mark K" <[EMAIL PROTECTED]>
Sent by: Linux on 390 Port <[EMAIL PROTECTED]>
07/09/2004 01:36 PM
Please respond to Linux on 390 Port
To: [EMAIL PROTECTED]
cc:
Subject: Re: slackware 9.1
Steve,
That _should_ have happened automatically in /linuxrc, since you have
DASD=
specified in the parmfile. What does "cat /proc/dasd/devices" and "lsmod"
show?
Mark Post
-----Original Message-----
From: Linux on 390 Port [mailto:[EMAIL PROTECTED] On Behalf Of
Steve
Gentry
Sent: Friday, July 09, 2004 2:32 PM
To: [EMAIL PROTECTED]
Subject: Re: slackware 9.1
Parm file below:
<parm>
root=/dev/ram0 ro ip=off ramdisk_size=40000 DASD=301-306
HOST=lnxrh03.vm.llic.com:eth0:10.140.1.43:1500
NETWORK=10.140.1.0:255.255.255.0:10.140.1.255:10.140.1.254
DNS=162.133.1.19:162.133.1.22
SEARCHDNS=llic.com:vm.llic.com CHANDEV=qeth0,0xE108,0xE109,0xE10A
QETHPARM=add_parms,0x10,0xE108,0xE10A,portname:CHPID01
</parm>
Yes they are in the parm file, yes they are attached. INSMOD doesn't
sound familiar. Where should that be done?
----------------------------------------------------------------------
For LINUX-390 subscribe / signoff / archive access instructions, send
email
to [EMAIL PROTECTED] with the message: INFO LINUX-390 or visit
http://www.marist.edu/htbin/wlvindex?LINUX-390
----------------------------------------------------------------------
For LINUX-390 subscribe / signoff / archive access instructions,
send email to [EMAIL PROTECTED] with the message: INFO LINUX-390 or
visit
http://www.marist.edu/htbin/wlvindex?LINUX-390
----------------------------------------------------------------------
For LINUX-390 subscribe / signoff / archive access instructions,
send email to [EMAIL PROTECTED] with the message: INFO LINUX-390 or visit
http://www.marist.edu/htbin/wlvindex?LINUX-390
