you can look in the CP Planning and Administration manual, and under the system config file area look at the Operator_Console section and it will talk about a SYSG console. The SYSG and the P-Comm software on the HMC make up the Integrated 3270 console If you do not see the P-Comm ICON on the HMC than you are not at the correct level I will go look on my HMC and make sure I am telling you the right stuff.
Larry -----Original Message----- From: Linux on 390 Port [mailto:[EMAIL PROTECTED] On Behalf Of Peter E. Abresch Jr. - at Pepco Sent: Thursday, October 14, 2004 09:58 AM To: [EMAIL PROTECTED] Subject: Re: z/VM V5.1 Installation Question Thanks for such a quick response. We are currently running HMC level 1.7.3. What exactly is the Integrated 3270 Console? Is it attached to a controller or is it emulated somehow? Peter "Davis, Larry" <[EMAIL PROTECTED] ielsenMedia.com> To Sent by: Linux on [EMAIL PROTECTED] 390 Port cc <[EMAIL PROTECTED] IST.EDU> Subject Re: z/VM V5.1 Installation Question 10/14/2004 09:35 AM Please respond to Linux on 390 Port <[EMAIL PROTECTED] IST.EDU> This would be considered the SYSG console and if your HMC is at the 1.8.0 or above level you should see a P-Comm 3270 Terminal symbol on one of the right hand screens of the HMC this is the Integrated 3270 Console Larry -----Original Message----- From: Linux on 390 Port [mailto:[EMAIL PROTECTED] On Behalf Of Peter E. Abresch Jr. - at Pepco Sent: Thursday, October 14, 2004 09:27 AM To: [EMAIL PROTECTED] Subject: z/VM V5.1 Installation Question I am reviewing z/VM Version 5.1 "Guide for Automated Installation and Service" installation instructions in preparation of our VM server for Linux. We requested z/VM on a DVD. We are currently running an IBM 2066-002 and this is our first exposure to VM, being z/OS gurus, and Linux newbies. On page 70 of the manual, under heading STEP 1. Load the RAMDISK from the Processor HMC, step 2, it talks about the Integrated 3270 Console. We do not have this option. Why? How do we get it? An excerpt follows: On the Hardware Management Console, bring up an Integrated 3270 Console for the LPAR you are using to install. a. From the Hardware Management Console Workplace window, double click on Groups. b. From the GROUPS WORK AREA window, double click on CPC IMAGES. c. From the CPC IMAGES WORK AREA window, highlight the LPAR on which you are going to install. d. From the CPC RECOVERY window, double click on Integrated 3270 console. The Integrated 3270 console window is displayed, which is where the messages are displayed when the system IPLs. We do not have any 3174 controllers for our z/VM LPAR. Will we require any? Once we find this Integrated 3270 Console, can we use that? Thanks for any info you can provide. Peter E. Abresch Jr. Pepco 202 331-6889 This Email message and any attachment may contain information that is proprietary, legally privileged, confidential and/or subject to copyright belonging to Pepco Holdings, Inc. or its affiliates ("PHI"). This Email is intended solely for the use of the person(s) to which it is addressed. If you are not an intended recipient, or the employee or agent responsible for delivery of this Email to the intended recipient(s), you are hereby notified that any dissemination, distribution or copying of this Email is strictly prohibited. If you have received this message in error, please immediately notify the sender and permanently delete this Email and any copies. PHI policies expressly prohibit employees from making defamatory or offensive statements and infringing any copyright or any other legal right by Email communication. PHI will not accept any liability in respect of such communications. ---------------------------------------------------------------------- For LINUX-390 subscribe / signoff / archive access instructions, send email to [EMAIL PROTECTED] with the message: INFO LINUX-390 or visit http://www.marist.edu/htbin/wlvindex?LINUX-390 This Email message and any attachment may contain information that is proprietary, legally privileged, confidential and/or subject to copyright belonging to Pepco Holdings, Inc. or its affiliates ("PHI"). This Email is intended solely for the use of the person(s) to which it is addressed. If you are not an intended recipient, or the employee or agent responsible for delivery of this Email to the intended recipient(s), you are hereby notified that any dissemination, distribution or copying of this Email is strictly prohibited. If you have received this message in error, please immediately notify the sender and permanently delete this Email and any copies. PHI policies expressly prohibit employees from making defamatory or offensive statements and infringing any copyright or any other legal right by Email communication. PHI will not accept any liability in respect of such communications. ---------------------------------------------------------------------- For LINUX-390 subscribe / signoff / archive access instructions, send email to [EMAIL PROTECTED] with the message: INFO LINUX-390 or visit http://www.marist.edu/htbin/wlvindex?LINUX-390 ---------------------------------------------------------------------- For LINUX-390 subscribe / signoff / archive access instructions, send email to [EMAIL PROTECTED] with the message: INFO LINUX-390 or visit http://www.marist.edu/htbin/wlvindex?LINUX-390
