I had the same problem. I tried to detect using 'insmod dasd dasd=0158'
but it could not find the 'dasd' module.
But when I used yast, dasd, it showed up and I activated it
__________________________________________
Ranga Nathan / CSG
Systems Programmer - Specialist; Technical Services;
BAX Global Inc. Irvine-California
Tel: 714-442-7591 Fax: 714-442-2840
Jeremy Warren <[EMAIL PROTECTED]>
Sent by: Linux on 390 Port <[EMAIL PROTECTED]>
12/09/2004 07:28 AM
Please respond to Linux on 390 Port
To: [EMAIL PROTECTED]
cc:
Subject: Re: Dynamically adding DASD...
OOPS dropped off the trailing "s"...
I believe the command is:
echo -n "add device range=491" >> /proc/dasd/devices
-----------------------------------
Jeremy Warren
Sr. Systems Programmer
KB Toy Stores
mailto:[EMAIL PROTECTED]@kbtoys.com
"Nix, Robert P." <[EMAIL PROTECTED]>
Sent by: Linux on 390 Port <[EMAIL PROTECTED]>
12/09/2004 08:59 AM
Please respond to Linux on 390 Port
To: [EMAIL PROTECTED]
cc:
Subject: [LINUX-390] Dynamically adding DASD...
I'm missing some minor key point in this process...
I allocated a new minidisk for a Linux image (SuSE SLES 8), and linked it
into the virtual machine. I've tried CMS formatting it and not formatting
it, and it appears to have the same problem. I go to /proc/dasd, and issue
the command
"echo "add devices range=491" > devices. Then I type "cat devices" and
where I expected to see the new device is a line such as:
None(none) at ( 94: 24) is dasdg (ro): unknown
If I now add the device into zipl, and restart the image, the disk will be
there w/ no problems. What am I doing wrong in the dynamic allocation?
--
Robert P. Nix 507-284-0844
Mayo Foundation
200 First St. SW
Rochester, MN 55905
----
"In theory, theory and practice are the same, but in practice theory and
practice are different."
----------------------------------------------------------------------
For LINUX-390 subscribe / signoff / archive access instructions,
send email to [EMAIL PROTECTED] with the message: INFO LINUX-390 or
visit
http://www.marist.edu/htbin/wlvindex?LINUX-390
----------------------------------------------------------------------
For LINUX-390 subscribe / signoff / archive access instructions,
send email to [EMAIL PROTECTED] with the message: INFO LINUX-390 or
visit
http://www.marist.edu/htbin/wlvindex?LINUX-390
----------------------------------------------------------------------
For LINUX-390 subscribe / signoff / archive access instructions,
send email to [EMAIL PROTECTED] with the message: INFO LINUX-390 or visit
http://www.marist.edu/htbin/wlvindex?LINUX-390
