can you post the dmesg output please.
-Cameron
-----Original Message-----
From: Linux on 390 Port [mailto:[EMAIL PROTECTED] Behalf Of
Wiggins, Mark
Sent: Thursday, December 23, 2004 09:33
To: [email protected]
Subject: Re: FCP question
Still getting same error. Changed to
0xa210 0x01:0x5005076300d08276 0x00:0x502f000000000000
0xa310 0x01:0x5005076300c28276 0x00:0x502f000000000000
And reran "mk_initrd" and "zipl" and "fdisk /dev/sda". The messages were
the same
sd: allocated major 8
sd: find_free_slot ...<7>sd: ... found 08:00
Attached scsi disk sda at scsi0, channel 0, id 1, lun 0
sd: find_free_slot ...<7>sd: ... found 08:10
Attached scsi disk sdb at scsi1, channel 0, id 1, lun 0
zfcp: FSF: zfcp_fsf_send_fcp_command_task_handler: status for
SCSI Command:
00000000 0000
zfcp: FSF: zfcp_fsf_send_fcp_command_task_handler: SCSI status
code 0x2
00000000 00000000 00000202 00000000 00000020 00000000
70000600 00000018 00000000 29000000 00000400 00000000 00000000
00000000
SCSI device sda: 7812544 512-byte hdwr sectors (4000 MB)
sda: sda1
zfcp: FSF: zfcp_fsf_send_fcp_command_task_handler: status for
SCSI Command:
00000000 0000
zfcp: FSF: zfcp_fsf_send_fcp_command_task_handler: SCSI status
code 0x2
00000000 00000000 00000202 00000000 00000020 00000000
70000600 00000018 00000000 29000000 00000400 00000000 00000000
00000000
SCSI device sdb: 7812544 512-byte hdwr sectors (4000 MB)
sdb: sdb1
zfcp: config: zfcp_unit_enqueue: Warning: A Unit with SCSI LUN
0x0 already exists. Skipping record.
zfcp: SCSI: zfcp_config_parse_record_add: warning: unable to add
record: 0xa210 1:0x5005076300d08276 0:0x502f000000000000
zfcp: SCSI: zfcp_add_map_proc_write: Warning: One or several
mapping entries were not added to the module configuration.
-----Original Message-----
From: Linux on 390 Port [mailto:[EMAIL PROTECTED] On Behalf Of
Seader, Cameron
Sent: Thursday, December 23, 2004 11:07 AM
To: [email protected]
Subject: Re: FCP question
YOu went wrong on the zfcp.conf configuration. you will notice that
where you put in the 0x1: you need to have a 0x01 and where you put in
the LUN # of 0x0: you need to have 0x00:, it is very picky. If you have
one thing wrong it won't work.
-Cameron
-----Original Message-----
From: Linux on 390 Port [mailto:[EMAIL PROTECTED] Behalf Of
Wiggins, Mark
Sent: Thursday, December 23, 2004 09:04
To: [email protected]
Subject: Re: FCP question
Last question I hope. I've since created an /etc/zfcp.conf file with the
following.
0xa210 0x1:0x5005076300d08276 0x0:0x502f000000000000
0xa310 0x1:0x5005076300c28276 0x0:0x502f000000000000
I ran "mk_initrd" and zipl. Upon reboot a I noticed the following in the
logs,
sd: allocated major 8
sd: find_free_slot ...<7>sd: ... found 08:00
Attached scsi disk sda at scsi0, channel 0, id 1, lun 0
sd: find_free_slot ...<7>sd: ... found 08:10
Attached scsi disk sdb at scsi1, channel 0, id 1, lun 0
zfcp: FSF: zfcp_fsf_send_fcp_command_task_handler: status for
SCSI Command:
00000000 0000
zfcp: FSF: zfcp_fsf_send_fcp_command_task_handler: SCSI status
code 0x2
00000000 00000000 00000202 00000000 00000020 00000000
70000600 00000018 00000000 29000000 00000400 00000000 00000000
00000000
SCSI device sda: 7812544 512-byte hdwr sectors (4000 MB)
sda: sda1
zfcp: FSF: zfcp_fsf_send_fcp_command_task_handler: status for
SCSI Command:
00000000 0000
zfcp: FSF: zfcp_fsf_send_fcp_command_task_handler: SCSI status
code 0x2
00000000 00000000 00000202 00000000 00000020 00000000
70000600 00000018 00000000 29000000 00000400 00000000 00000000
00000000
SCSI device sdb: 7812544 512-byte hdwr sectors (4000 MB)
sdb: sdb1
zfcp: config: zfcp_unit_enqueue: Warning: A Unit with SCSI LUN
0x0 already exists. Skipping record.
zfcp: SCSI: zfcp_config_parse_record_add: warning: unable to add
record: 0xa210 1:0x5005076300d08276 0:0x502f000000000000
zfcp: SCSI: zfcp_add_map_proc_write: Warning: One or several
mapping entries were not added to the module configuration.
It seems as though I am not "multipathing". Where did I go wrong???
SLES8/zVM 5.1.
Mark Wiggins
-
----------------------------------------------------------------------
For LINUX-390 subscribe / signoff / archive access instructions,
send email to [EMAIL PROTECTED] with the message: INFO LINUX-390 or visit
http://www.marist.edu/htbin/wlvindex?LINUX-390
This transmission may contain information that is privileged, confidential
and/or exempt from disclosure under applicable law. If you are not the intended
recipient, you are hereby notified that any disclosure, copying, distribution,
or use of the information contained herein (including any reliance thereon) is
STRICTLY PROHIBITED. If you received this transmission in error, please
immediately contact the sender and destroy the material in its entirety,
whether in electronic or hard copy format. Thank you. A1.
----------------------------------------------------------------------
For LINUX-390 subscribe / signoff / archive access instructions,
send email to [EMAIL PROTECTED] with the message: INFO LINUX-390 or visit
http://www.marist.edu/htbin/wlvindex?LINUX-390
