Here's what I think is the pertinent information Here's my current zfcp.conf file
0xa210 0x01:0x5005076300d08276 0x00:0x502f000000000000 0xa310 0x01:0x5005076300c28276 0x00:0x502f000000000000 And here's the dmesg, debug: qdio_trace: new level 2 zfcp: zfcp_module_init: driver version 0x3003c debug: zfcp_lock: new level 4 debug: zfcp_req0xa210: new level 6 debug: zfcp_req0xa210: new level 3 debug: zfcp_erp0xa210: new level 6 debug: zfcp_req0xa310: new level 6 debug: zfcp_req0xa310: new level 3 debug: zfcp_erp0xa310: new level 6 scsi: limiting sg entries to 170 scsi0 : zfcp scsi: limiting sg entries to 170 scsi1 : zfcp Vendor: IBM Model: 2105F20 Rev: .129 Type: Direct-Access ANSI SCSI revision: 03 Vendor: IBM Model: 2105F20 Rev: .129 Type: Direct-Access ANSI SCSI revision: 03 Journalled Block Device driver loaded dasd: initializing... debug: dasd: new level 3 dasd: Registered successfully to major no 94 dasd: initialization finished sd: allocated major 8 sd: find_free_slot ...<7>sd: ... found 08:00 Attached scsi disk sda at scsi0, channel 0, id 1, lun 0 sd: find_free_slot ...<7>sd: ... found 08:10 Attached scsi disk sdb at scsi1, channel 0, id 1, lun 0 zfcp: FSF: zfcp_fsf_send_fcp_command_task_handler: status for SCSI Command: 00000000 0000 zfcp: FSF: zfcp_fsf_send_fcp_command_task_handler: SCSI status code 0x2 00000000 00000000 00000202 00000000 00000020 00000000 70000600 00000018 00000000 29000000 00000400 00000000 00000000 00000000 SCSI device sda: 7812544 512-byte hdwr sectors (4000 MB) sda: sda1 zfcp: FSF: zfcp_fsf_send_fcp_command_task_handler: status for SCSI Command: 00000000 0000 zfcp: FSF: zfcp_fsf_send_fcp_command_task_handler: SCSI status code 0x2 00000000 00000000 00000202 00000000 00000020 00000000 70000600 00000018 00000000 29000000 00000400 00000000 00000000 00000000 SCSI device sdb: 7812544 512-byte hdwr sectors (4000 MB) sdb: sdb1 zfcp: config: zfcp_unit_enqueue: Warning: A Unit with SCSI LUN 0x0 already exists. Skipping record. zfcp: SCSI: zfcp_config_parse_record_add: warning: unable to add record: 0xa210 1:0x5005076300d08276 0:0x502f000000000000 zfcp: SCSI: zfcp_add_map_proc_write: Warning: One or several mapping entries were not added to the module configuration. kjournald starting. Commit interval 5 seconds EXT3-fs: mounted filesystem with ordered data mode. VFS: Mounted root (ext3 filesystem) readonly. ---------------------------------------------------------------------- For LINUX-390 subscribe / signoff / archive access instructions, send email to [EMAIL PROTECTED] with the message: INFO LINUX-390 or visit http://www.marist.edu/htbin/wlvindex?LINUX-390
