Hello, I am trying to run SuSE Linux Enterprise 9.0 SP 1 on z/VM 5.1. The Virtual machine "linux002" has been loaded and will (to an extent) run. However, during the boot cycle, the virtual NIC (qeth0) begins to initialize, then shuts itself down. The rest of the boot cycle completes, and the expected login prompt comes up within the VM / 5270 terminal session. There is no network / SSH / VNC connectivity due to the NIC shutdown; I've checked the network configuration files (/etc/sysconfig/network-scripts/ifcfg-qeth...), everything is as it should be (IP, netmask, broadcast address, etc). I am building a "stripped down" base system; it'spossible I'm leaving out some package necessary for the NIC to function properly. Any ideas on why this is happening or do I just need to do a "full" build and start over?
Ila Z. Miller ___________________________________________________________ ___________________________________________________________ Health Care Information Systems University of Iowa Hospitals & Clinics [EMAIL PROTECTED] Phone: 319.356.0067 FAX: 319.356.3521 Notice: This e-mail (including attachments) is covered by the Electronic Communications Privacy Act, 18 U.S.C. 2510-2521, is confidential and may be legally privileged. If you are not the intended recipient, you are hereby notified that any retention, dissemination, distribution, or copying of this communication is strictly prohibited. Please reply to the sender that you have received the message in error, then delete it. Thank you. ---------------------------------------------------------------------- For LINUX-390 subscribe / signoff / archive access instructions, send email to [EMAIL PROTECTED] with the message: INFO LINUX-390 or visit http://www.marist.edu/htbin/wlvindex?LINUX-390
