I don't recall exactly the deal here (I have run into in the past), but you can try adding "-b 4096" to the e2fsck as well.
Leland I wish I could remember the exact reason... > -----Original Message----- > From: Linux on 390 Port [mailto:[EMAIL PROTECTED] On > Behalf Of James Melin > Sent: Tuesday, May 17, 2005 11:55 AM > To: [email protected] > Subject: Message: vadnais kernel: EXT2-fs: blocksize too > small for device. > > I did a dasdfmt -f /dev/dasdd -b 4096 > > That worked > > I did a fdasd /dev/dasdd and made a file system on this > mini-disk - Went ok. > > I did an mke2fs on /dev/dasdd1 and this worked > > I mount it and I get: > > May 17 11:50:45 vadnais kernel: EXT2-fs: blocksize too small > for device. > > cat /proc/dasd/devices reveals: > > 0210(ECKD) at ( 94: 0) is dasda : active at blocksize: > 4096, 108000 > blocks, 421 MB > 0201(ECKD) at ( 94: 4) is dasdb : active at blocksize: > 4096, 900000 > blocks, 3515 MB > 0202(ECKD) at ( 94: 8) is dasdc : active at blocksize: > 4096, 902880 > blocks, 3526 MB > 0204(ECKD) at ( 94: 12) is dasdd : active at blocksize: > 4096, 108000 > blocks, 421 MB > > So I don't get this > > ---------------------------------------------------------------------- > For LINUX-390 subscribe / signoff / archive access > instructions, send email to [EMAIL PROTECTED] with the > message: INFO LINUX-390 or visit > http://www.marist.edu/htbin/wlvindex?LINUX-390 ---------------------------------------------------------------------- For LINUX-390 subscribe / signoff / archive access instructions, send email to [EMAIL PROTECTED] with the message: INFO LINUX-390 or visit http://www.marist.edu/htbin/wlvindex?LINUX-390
