lsmod does confirm that it's loaded. ifconfig -a, on the other hand,
still doesn't list anything. If I try to manually bring the interface
up by 'ifup qeth-bus-ccw-0.0.0700' I get "Interface is not available."
-Matt
Post, Mark K wrote:
Well, that looks like it worked. lsmod will confirm if it loaded, and
ifconfig -a should show an interface now (maybe).
Mark Post
-----Original Message-----
From: Linux on 390 Port [mailto:[EMAIL PROTECTED] On Behalf Of
Matt Gourley
Sent: Monday, June 27, 2005 11:58 AM
To: [email protected]
Subject: Re: RPMs to keep/purge after installation
# modprobe qeth
qeth: loading qeth S/390 OSA-Express driver ($Revision: 1.77.2.20
$/$Revision: 1
.98.2.11 $/$Revision: 1.27.2.5 $/$Revision: 1.8.2.2 $/$Revision: 1.7.2.1
$/$Revi
sion: 1.5.2.4 $/$Revision: 1.19.2.7 $ :IPv6 :VLAN)
Jun 27 11:56:35 LNXMSTR9 kernel: qeth: loading qeth S/390 OSA-Express
driver ($R
evision: 1.77.2.20 $/$Revision: 1.98.2.11 $/$Revision: 1.27.2.5
$/$Revision: 1.8
.2.2 $/$Revision: 1.7.2.1 $/$Revision: 1.5.2.4 $/$Revision: 1.19.2.7 $
:IPv6 :VL
AN)
-Matt
Post, Mark K wrote:
Ok, then what happens if you do a "modprobe qeth" command?
Mark Post
----------------------------------------------------------------------
For LINUX-390 subscribe / signoff / archive access instructions,
send email to [EMAIL PROTECTED] with the message: INFO LINUX-390 or visit
http://www.marist.edu/htbin/wlvindex?LINUX-390
--
Matt Gourley
Systems Administrator
Pennsylvania State University
Administrative Information Services - Infrastructure/Sysarc
Rm 25 Shields Bldg., University Park, PA 16802
(814) 865-8726
[EMAIL PROTECTED]
----------------------------------------------------------------------
For LINUX-390 subscribe / signoff / archive access instructions,
send email to [EMAIL PROTECTED] with the message: INFO LINUX-390 or visit
http://www.marist.edu/htbin/wlvindex?LINUX-390
