Do you have the missing interrupt handler time set sufficiently high?
The newer DASD typically required that the MIH time be set high, you
might want to check the documentation for the DS8100 or the hardware
bucket doc for VM to determine what the correct value should be.
mainframe_s390 wrote:
Hi,all
Please teach me.
I added a new disk device(DS8100).
The address range is 1000-1F9F.
Next message is showned at z/VM V5.1 every IPL.
HCPIIO1250I Device 1000 cannot be varied online because a
time-out condition occurred.
・
・
HCPIIO1250I Device 1F9F cannot be varied online because a
time-out condition occurred.
The SYSTEM CONFIG file of the z/VM.(Only DEVICES
statement)
DEVICES,
ONLINE_AT_IPL 0000-FFFF
Please teach me the way of solution.
-----
K.M.
__________________________________
Save the earth
http://pr.mail.yahoo.co.jp/ondanka/
----------------------------------------------------------------------
For LINUX-390 subscribe / signoff / archive access instructions,
send email to [EMAIL PROTECTED] with the message: INFO LINUX-390 or visit
http://www.marist.edu/htbin/wlvindex?LINUX-390
--
Rich Smrcina
VM Assist, Inc.
Main: (262)392-2026
Cell: (414)491-6001
Ans Service: (360)715-2467
rich.smrcina at vmassist.com
Catch the WAVV! http://www.wavv.org
WAVV 2006 - Chattanooga, TN - April 7-11, 2006
----------------------------------------------------------------------
For LINUX-390 subscribe / signoff / archive access instructions,
send email to [EMAIL PROTECTED] with the message: INFO LINUX-390 or visit
http://www.marist.edu/htbin/wlvindex?LINUX-390
