I see. z/VSE. Leads me to another question. For those VSE shops that run under VM or have multiple VSEs running, how many shops are entirely z/VSE?
Or in a different tangent, how many shops CAN be FCP only (with no FICON or ESCON attached storage)? True, large shops may have multiple dasd subsystems so some can be CKD and some can be scsi dasd. Where I've been comming from, is that there is few shops (percentage wise) that can meet an entirely FCP attached dasd requirement. Am I wrong about that? We just went to a DS6800 with Ficon2 attachments. I thought we would be really up there as far as dasd technology goes. You're going to rain on my parade if the word comes back that without FCP attached dasd, we are just backwater hillbillies<G>. Tom Duerbusch THD Consulting >>> [EMAIL PROTECTED] 09/23/05 12:19 PM >>> > -----Original Message----- > From: Linux on 390 Port [mailto:[EMAIL PROTECTED] On > Behalf Of Tom Duerbusch > Sent: Friday, September 23, 2005 12:15 PM > To: [email protected] > Subject: Re: 3390 vs. FCP Connection to San running scsi > > > What I ment was... > > With VSE you have to use FICON Tom, According to: http://www-03.ibm.com/servers/eserver/zseries/connectivity/fcp.html You can use FCP with z/VM, z/VSE, and Linux on zSeries. More z/VSE http://www-306.ibm.com/common/ssi/fcgi-bin/ssialias?infotype=an&subtype= ca&appname=GPA&htmlfid=897/ENUS205-014 watch out for wrap. -- John McKown Senior Systems Programmer UICI Insurance Center Information Technology This message (including any attachments) contains confidential information intended for a specific individual and purpose, and its' content is protected by law. If you are not the intended recipient, you should delete this message and are hereby notified that any disclosure, copying, or distribution of this transmission, or taking any action based on it, is strictly prohibited. ---------------------------------------------------------------------- For LINUX-390 subscribe / signoff / archive access instructions, send email to [EMAIL PROTECTED] with the message: INFO LINUX-390 or visit http://www.marist.edu/htbin/wlvindex?LINUX-390 ---------------------------------------------------------------------- For LINUX-390 subscribe / signoff / archive access instructions, send email to [EMAIL PROTECTED] with the message: INFO LINUX-390 or visit http://www.marist.edu/htbin/wlvindex?LINUX-390
