> first,I run the command 「echo 1 > > /sys/bus/ccw/devices/0.0.0583/online > 」 > (0583 is 3590 address.「ATTACH 583 LINUX 583」command from > MAINT on z/VM.) > > but, 0583 doesn't become online.
You must do the ATTACH first. > second, I run the commands 「mknod /dev/ntibm0 c 254 > 0」and > 「mknod /dev/rtibm0 c 254 1」 > > When I run the command 「lsmod」, I can't see modules for > 3590tape anywhere. > > Should I install 「s390_oco-2.6.5-7.201.s390x.rpm」 > package or use OCO module on devloppers site? To use channel-attached tape, you must install the OCO tape device driver modules that match your kernel level. They are not included in most of the Linux distributions. > Please teach me. The Linux Device Drivers redbook covers this topic in detail. Please refer to it. -- db ---------------------------------------------------------------------- For LINUX-390 subscribe / signoff / archive access instructions, send email to [EMAIL PROTECTED] with the message: INFO LINUX-390 or visit http://www.marist.edu/htbin/wlvindex?LINUX-390
