mainframe_s390 wrote: > first,I run the command 「echo 1 > > /sys/bus/ccw/devices/0.0.0583/online > 」 > (0583 is 3590 address.「ATTACH 583 LINUX 583」command from > MAINT on z/VM.) > > but, 0583 doesn't become online. Do you see any messages in "dmesg"? Probably there is no device driver for the thing present. In this case try "modprobe tape" and "modprobe tape_3590".
> second, I run the commands 「mknod /dev/ntibm0 c 254 > 0」and > 「mknod /dev/rtibm0 c 254 1」 These can only succeed once your device shows up in /proc/tapedevices. > When I run the command 「lsmod」, I can't see modules for > 3590tape anywhere. > > Should I install 「s390_oco-2.6.5-7.201.s390x.rpm」 > package or use OCO module on devloppers site? Yes, you need to have the oco module to operate the drive. hope this helps, Carsten -- Carsten Otte IBM Linux technology center ARCH=s390 ---------------------------------------------------------------------- For LINUX-390 subscribe / signoff / archive access instructions, send email to [EMAIL PROTECTED] with the message: INFO LINUX-390 or visit http://www.marist.edu/htbin/wlvindex?LINUX-390
