Lee, I am running SLES9 SP3 64bit (without VM) in an LPAR and I have not had this problem. The command "shutdown -r now" just worked.
Doug -----Original Message----- From: Linux on 390 Port [mailto:[EMAIL PROTECTED] On Behalf Of Lee Stewart Sent: Tuesday, January 31, 2006 10:55 AM To: [email protected] Subject: Reboot fails on SLES9 after SP3 Hi... It seems like (aka: I haven't had the opportunity to definitively prove it) after I've upgraded SLES9 systems to SP3 that reboot (or init 6, or shutdown -r now) all shutdown cleanly, but don't restart. From the 3270 console these are the last messages: Please stand by while rebooting the system... md: stopping all md devices. md: md0 switched to read-only mode. Restarting system. The virtual machine does seem to burn some cycles after, but it never restarts until you manually re-IPL it. Has anyone else seen this? Anyone know of a fix? Thanks, Lee -- Lee Stewart, Senior SE Sirius Enterprise Systems Group Phone: (303) 798-2954 Fax: (720) 228-2321 [EMAIL PROTECTED] www.siriuscom.com ---------------------------------------------------------------------- For LINUX-390 subscribe / signoff / archive access instructions, send email to [EMAIL PROTECTED] with the message: INFO LINUX-390 or visit http://www.marist.edu/htbin/wlvindex?LINUX-390 ---------------------------------------------------------------------- For LINUX-390 subscribe / signoff / archive access instructions, send email to [EMAIL PROTECTED] with the message: INFO LINUX-390 or visit http://www.marist.edu/htbin/wlvindex?LINUX-390
